- 93 -Windows Utilities4 4. Using Utility SoftwareOperator Panel LanguageSetupYou can change the operator panel displaylanguage.Note● This program uses the print driver. Please install theprinter driver on the computer beforehand.Starting Up1 Turn on the printer.2 Plug in the computer, and insert theSoftware DVD-ROM.3 Click [Run Setup.exe].If the [User Account Control] dialog boxappears, click [Yes].4 Select the model and click [Next].5 Read the user license agreement andclick [I Agree].6 Read the recommendation on theenvironment and click [Next].7 Select [Device Configuration].8 Click [Operator Panel LanguageSetup].9 Click on [Next].10 Select the printer and click [Next].11 Select the model name of the printerand click on [Next].12 Select the language and click on [Next].13 Click on [Print Test Page] and click on[Next].14 Check whether the menu languageformat value printed in step 12 is in thevalue range displayed on the screen.15 Click on [Next].16 Check the content to be set and, click on[Setup].17 Click [Finish].18 Check that the language you want isdisplayed is on the screen of the printer.19 Restart the printer.Note● If the language selection screen is not selected, carryout the following procedure.a Click on [Start] and select [Searchfor Programs and Files].b Enter “D:/Utilities/PanelDwn/oppnlngs.exe” and press the<Enter> key.(This example uses the DVD-ROMdrive (D:))c Go to step 8.
