- 41 -1 1. Convenient Print Functions12 Click [Close].13 Select the overlay to use from the[Defined Overlays] and click [Add].14 Click [OK].15 Configure other settings if necessary andthen start printing.Reference● "Configuration Tool" P.89.For Windows PS Printer DriverMemo● An overlay is a form group. You can register three formswith one overlay.1 Click [Start] and select [Devices andPrinters].2 Right-click theYour Printer icon andselect the type of driver you want tospecify from [Printing preferences].3 Select the [Job Options] tab.4 Click [Overlay].5 Select [Use Overlay] from the drop-down list and click [New].6 Enter the exact name of the overlay youregistered in the Configuration Tool inthe [Form Name] box and click [Add].7 Enter a name for the overlay in the[Overlay Name] box.8 Select the page of the document onwhich to print the overlay from the[Print on Pages] drop-down list.9 Click [OK].10 Select the overlay to use from the[Defined Overlay] list and then click[Add].11 Click [OK].12 Click [OK] to close the print setup dialogbox.13 Open the file you want to print.14 Start printing on the print dialog.Reference● "Configuration Tool" P.89.Storing Print DataYou can store print data on the SD memory cardinstalled on the printer and print it as neededfrom the operator panel by entering a password.Note● If the spooled data cannot be stored in the SD memorycard because of a memory shortage, a message indicatingthat the data is invalid appears.● This function is not available with the Windows XPSprinter driver and the Mac OS X PS printer driver.For Windows PCL Printer Driver1 Open the file you want to print.2 From the [File] menu, select [Print].3 Click [Preferences] or [Properties].4 Select the [Job Options] tab.5 Check [Store to SD].6 Enter a job name in the [Job Name]box and a password in the [JobPassword] box.If you check the [Request Job Name for eachprint job] box, a prompt for the job nameappears when you send the job to the printer.7 Click [OK].8 Configure other settings if necessary andthen start printing.The print job is sent to the printer, but is notprinted.9 Press the <Fn> key.Memo● When a printer is in the power saving mode, pressthe <POWER SAVE> button to restore from themode.10 Enter <0>, <0> and <2> using theten-key pad and press the <ENTER>button.
