10Item Displaymode Description of settingsFOCUS ASSIST (Camera) Allocates a function to the FOCUS ASSIST button.EXPANDED:Magnifies the center portion of the image.GRAPH:Displays a frequency distribution graph at the top right in the viewfinderand LCD monitor.BOTH:Magnifies the center portion of the image and displays a histogram.MF ASSIST (Camera) Automatically sets the last focus during manual focusing.ON:Automatically sets the last focus.The focus may not be set correctly if the last focus differsconsiderably from the manually set focus.You cannot operate using the remote control connected to the CAMREMOTE jack.OFF:The focus is not adjusted automatically.••WFM (Camera) Switches the waveform display that appears when the WFM button ispressed.WAVE:Displays a waveform.VECTOR:Opens a vector display.WAVE/VECT:Each press of the button, switches the settings in the following order:OFF " WAVE (waveform) " VECTOR (vector) " OFF.LCD (Camera) Allocates a function to the LCD button.LCD REV:Flips the LCD image vertically and horizontally.OVERSCAN:Switches between overscan and underscan of the LCD/viewfinderimage.This button toggles between the overscan and underscan image ateach press.LCD BL:Switches the brightness of the LCD backlight.The brightness of the backlight set using LCD BL is retained whenfunctions assigned using the LCD button change.•AUTO SW screenItem Displaymode Description of settingsA.IRIS (Camera) ON:Performs the auto iris control in auto mode. The IRIS button isdeactivated.OFF:Deactivates the auto iris control in auto mode. This performs the iriscontrol selected with the IRIS button.Setup menu list (continued)SW MODE screen (continued)___indicates the factory setting.
