Panasonic AG-HPX172EN Operating Instructions Manual

Contents

Panasonic AG-HPX172EN Operating Instructions Manual Manual pdf 46 page image

6All data recorded while this mode is activewill be contained in one file.No guarantees are made for the 1394 outputimages.Operation is not possible even if only one ofthe inserted cards is DIR ENTRY NG CARD.(Page 90)After interval recording has started, arecordable P2 card cannot be used even if itis inserted into an empty slot.The slots for recording in this mode areindicated by the orange P2 card accesslamps.The slots for recording P2 cards that areinserted after starting recording are indicatedby the green P2 card access lamps.Text memos cannot be added.One-shot recording (ONE-SHOT REC)This function records a single shot at each unit oftime which has been set.1 Check that the settings given on Page 5have been established for the OPERATIONTYPE item and recording format. Select ONE SHOT under REC FUNCTION.(Page 10)For menu operations (Page 93) Set the recording time using ONE-SHOTTIME. (Page 10) Press the START/STOP button.Recording continues for the duration set instep 2 and then goes on standby.To stop operation, push the Operation lever inthe g direction.To release standby, either turn off the unit’spower or select NORMAL under RECFUNCTION.The following displays will appear on the leftof the operation status display.While recording is underway: I-REC lights up.In temporary standby: I-PAUSE lights up.While recording is stopped: The “I-” ofI-PAUSE flashes.The pre-recording function does not work.No sound is recorded.All data recorded while this mode is activewill be contained in one file.No guarantees are made for the 1394 outputimages.••••••••••••Operation is not possible even if only one ofthe inserted cards is DIR ENTRY NG CARD.(Page 90)When continuous one-shot recordingis performed, there may be delays inacknowledging the recording operation.After one-shot recording has started, arecordable P2 card cannot be used even if itis inserted into an empty slot.The slots for recording in this mode areindicated by the orange P2 card accesslamps.The slots for recording P2 cards that areinserted after starting recording are indicatedby the green P2 card access lamps.Text memos cannot be added.Loop recording (LOOP REC)This function is used to record first on one cardand then on the next when you have inserted twoP2 cards into the card slots. If there is not enoughfree memory remaining on the second card,recording returns to the first card whose data willthen be overwritten. When data is overwritten, thesaved clips are deleted, and then the new clips arerecorded in their place. (Clip deletion is performedapproximately 30 seconds before the overwrite.)1 Check that the settings given on Page 5have been established for the OPERATIONTYPE item and recording format. Select LOOP under REC FUNCTION.(Page 10)For menu operations (Page 93) Press the START/STOP button.Recording starts.To stop operation, press the START/STOPbutton.To release the function, either turn off theunit’s power or select NORMAL under RECFUNCTION.The following displays will appear on the leftof the operation status display.While recording is underway: L-REC lightsup.While recording is stopped: L-PAUSE lightsup.Insufficient memory space: LACK L- flashes.••••••••Using the special recording functions (continued)