PreparationSetting the calendarThe CLOCK SET value is recorded in the contents(clip), and affects the sequence of playback of thethumbnails. Before carrying out recording, be sureto check and set CLOCK SET and TIME ZONE.This shows you how to adjust the calendar to 5:20PM on December 25, 2008.1 Set the POWER switch to ON. (Page 18) Press the MENU button. Push the Operation lever in the e or rdirection to set the time difference fromGreenwich Mean Time under TIME ZONEon the setting menu OTHER FUNCTIONSscreen. (Page 110)OTHER FUNCTIONSPUSH MENU TO RETURNCLOCK SET ––––+0:00OFF––––00012H00012H––––MIRRORTIME ZONEOPERATIONEVF SETPOWER SAVEMENU INITOPERATIONSELF SHOOT(Example of MENU in the CAM mode)For menu operation (Page 93)You can also use the menu buttons on theremote control. (Page 13) In the setup menus, OTHER FUNCTIONSscreen, CLOCK SET, select YES.OTHER FUNCTIONSPUSH MENU TO RETURNCLOCK SET ––––YESOFF––––00012H00012H––––MIRRORTIME ZONEOPERATIONEVF SETPOWER SAVEMENU INITOPERATIONSELF SHOOT5 Push the Operation lever in the w or qdirection to set YEAR to 008.CLOCK SETPUSH MENU TO RETURNYEAR 2008OCT011200MONTH+/– : PUSH y / tDAYHOURMINSEL : PUSH q / gChoose a year between 2000 and 2030.••6 Push the Operation lever in the r directionto move to the MONTH setting.CLOCK SETPUSH MENU TO RETURNYEAR 2008OCT011200MONTH+/– : PUSH y / tDAYHOURMINSEL : PUSH q / g7 Push the Operation lever in the w or qdirection to set MONTH to DEC.CLOCK SETPUSH MENU TO RETURNYEAR 2008DEC011200MONTH+/– : PUSH y / tDAYHOURMINSEL : PUSH q / g8 Set DAY, HOUR, and MIN using the methodshown in steps and 5.This is a 24-hour clock.CLOCK SETPUSH MENU TO RETURNYEAR 2008DEC251720MONTH+/– : PUSH y / tDAYHOURMINSEL : PUSH q / g9 Press MENU three times to exit the menus.The clock can vary in accuracy so check thatthe time is correct before shooting.When using the camera overseas, do notset the CLOCK SET option to the local time,but instead enter the time difference fromGreenwich mean time according to TIMEZONE.•••
