Menu109Item Displaymode Description of settingsSD CARD FORMAT (Camera) Formats the SD memory cards.OTHER FUNCTIONS screenItem Displaymode Description of settingsUSER FILE (Camera)(MCR)LOAD:Loads the settings in a previously stored user file.SAVE:Saves the updated user file settings.INITIAL:Returns the user settings in the user file to the factory settings.After a LOAD or INITIAL operation, turn the POWER switch off andthen back on again to make the new settings available.An INITIAL operation does not change the TIME ZONE settings(Page 110).•REMOTE (Camera)(MCR)Sets the operations of the supplied remote control unit. (Remote controlsetup. (Page 17))OFF:Operations are not accepted from any remote control.1:Accepts commands from the remote control set for “operation mode 1”:Accepts commands from the remote control set for “operation mode 2”.19 CONTROL (Camera) Sets the control method for backup recording using a backup unitconnected to the 1394 terminal.OFF:The backup unit is not controlled.EXT:The backup unit can be controlled by the START/STOP button. Theimages shot by the camera recorder are recorded by the backup unit.Note that the camera recorder does not record them.BOTH:The images shot by the camera recorder are recorded by both thecamera recorder and backup unit.CHAIN:When the camera recorder’s media approaches its end duringshooting, the backup unit in the recording stand-by mode automaticallystarts recording images.19 CMD SEL (Camera) Sets how the START/STOP button works for the backup unit.REC_P:This switches between recording and pause.STOP:This switches between recording and stop.If the backup unit does not have a rec pause function, select STOP.PC MODE (Camera)(MCR)Selects the terminal for data transfer. (You cannot select USB and 1394at the same time.)USB DEVICE:Mode for sending files using the USB connector.19 DEVICE:Mode for sending files using the 1394 connector.19 HOST:Mode for copying files from the P2 card onto an external hard disk driveusing the 1394 connector.___indicates the factory setting.CARD FUNCTIONS screen (continued)
