Shooting5Checking photos taken (REC CHECK)In the shooting pause mode, press the RECCHECK button.This plays back about 2 seconds of the video andaudio of the most recently recorded clip beforereturning to pause mode.Note that this REC CHECK portion will also berecorded to any equipment you have set up tomake backup recordings.The REC CHECK function does not work in PCand MCR mode.The HD recording(1080i/50i) settings arealready made in the default mode. (To view thecurrent settings, see Page 40.)P card access lampsCAM mode (MCR)Lights green:Data can be saved onto the cards or loadedfrom them.Blinks green (slow):No available space on card, card is write-protectedLights orange:Slot that is the object of recordingBlinks orange:Data is now being accessed.Blinks orange (fast):A card is now being recognized.Both lamps blink orange:Ejection of card during accessOff:Cards have not been inserted or formatted.Insertion of incompatible card.PC mode (USB DEVICE)Blinks orange: Data is now being accessed.Off: A status other than access underway.PC mode (19 DEVICE)Blinks orange: ConnectedOff: Not connected••PC mode (19 HOST)Lights green:Access standby.Blinks orange:Data is now being accessed.Off:Cards have not been inserted or formatted.Insertion of incompatible card.P card access lampProtecting against a possible erasureSwitch the write-protect switch of the P2 card to[PROTECT].Write-protect switchFormatting P cards1 Set the POWER switch to ON. (Page 18) Press the mode button and set it to MCRmode (the MCR lamp lights).Thumbnails are displayed.(Continued on the next page)•
