Playback6Thumbnail screenVideo data created on the P2 card in one shooting session is called a clip. When the MCR mode has beenestablished, the clips will be displayed on the LCD screen as thumbnails. (When there is a large number ofclips, it will take some time for them to be displayed on the screen.)You can perform the following operations using the thumbnail screen.Play, repair and delete clips, add and delete shot marks, as well as add text memos.Format P2 cards and SD memory cards.Load the metadata (shooting information, etc.) from SD memory cards to the unit.Basic thumbnail screen operationsTo use the thumbnail menu:1 On the thumbnail screen, press the MENU button to display the menu. Push the Operation lever in the e or r direction and press it (or pushit in the q direction).If another menu appears, repeat this step.To return to the previous screen, select EXIT and press the Operationlever or push it in the w direction.To release the menu mode, press MENU.To select a clip: Push the Operation lever in the w or q direction to move the yellow frame to the clip youwant to select, and press it again. (The frame changes to blue.) Pressing the Operation lever a secondtime deselects the thumbnail. To scroll the pages, press the PAGE (- or +) button.To Play back clips: Select a thumbnail and push the Operation lever in the q (playback) direction. (Fordetails on playback, see Page 62.)Only clips recorded in the same format as the playback format (6 in the figure below) can be playedback.THUMBNAIL OPERATION12345678PROPERTY META DATAALL CLIPSAME FORMAT CLIPSSELECTED CLIPSMARKED CLIPSTEXT MEMO CLIPSSLOT CLIPSSETUPEXITDELETEFORMATREPAIR CLIPRE-CONNECTIONEXCH. THUMBNAILEXITCLIP PROPERTYCARD STATUSDEVICESPROPERTY SETUPSYSTEM INFOEXITLOADRECORDUSER CLIP NAMEINITIALIZEPROPERTYEXITThumbnail screens are output only from the VIDEO OUT terminal.(Continued on the next page)•••••••MENUPUSH-SETPAGE/AUDIO MON/VARTHUMBNAIL1 2MENUPUSH-SETPAGE/AUDIO MON/VARTHUMBNAIL1 2
