Panasonic AG-HPX172EN Operating Instructions Manual

Contents

Panasonic AG-HPX172EN Operating Instructions Manual Manual pdf 90 page image

90WarningsCOPY INHIBITEDCan not record correctly because of the inputsignal copy-guarded.EXTERNAL19 DISCONNECTWhen the 1394 CONTROL item of the OTHERFUNCTIONS screen of the Setup menu is set toEXT and recording without connecting externalunits with 1394 terminal, this display appears.INCOMPATIBLE CARDThe card cannot be used since it does notcomply with the specified standard.RUN DOWN CARDThe maximum number of overwrites on the P2card has been exceeded.Operation continues. However, recordingor playback may not operate correctly. It isrecommended that you replace the P2 card withanother one.DIR ENTRY NG CARDThe directory structure on the P2 card is notsupported.Operation continues. However, recording orplayback may not operate correctly.The P2 card cannot be used for the specialrecording functions (interval recording, one-shotrecording, and loop recording).Back up data on the P2 card as soon as possible,and format the card before using it again.FORMAT ERR !This card is not compliant with the P2 standard.LOW BATTERYNo operations can be performed since thebattery charge is low.CANNOT ACCESSCannot access clips.CANNOT DELETECannot delete clips.CANNOT FORMATCannot format P2 cards or SD memory cards.CANNOT REPAIRCannot repair clips.CARD FULLThe P2 card does not have enough free spacefor recording.WRITE PROTECTEDThe P2 card or SD memory card iswriteprotected.NO CARDA P2 card or SD memory card has not beeninserted.NO FILEThere are no files (version upgrade files, etc.).ErrorsThese are displayed when an error occurs in theunit, P2 card, or other component. If the problemis not fixed by turning the power off and then onagain, either replace the card based on the errorinformation, or consult with your dealer as to whichone is to be purchased.CANNOT PLAYThis is displayed when trouble has occurredduring playback.CARD ERR (1) (2) (1/2)(Trouble has occurred in the P2 card found in theslot indicated by the number.)CLIP ERROR (clip trouble)UPDATING (clip recording)ERROR (other type of trouble)SYSTEM ERRORThis is displayed when trouble has occurred inthe system. Switch ON the power again.P MICON ERROR (no P2 microcomputerresponse)P CONTROL ERROR (trouble in P2 control)REC RAM OVERFLOW (recording RAMoverflow)TURN POWER OFFThis display appears when an abnormality occursas a result of the card being pulled out while datais being accessed.REC WARNINGThis is displayed when trouble has occurredduring recording. Carry out recording once again.If the warning persists, consult your dealer.CARD ERR (1) (2) (1/2)(Trouble has occurred in the P2 card found in theslot indicated by the number.)If the warning continues, turn off the power.If the warning appears even when recording iscarried out again, replace the card with anotherone.ERROR (other type of trouble)••Screen displays (continued)