Menu107Item Displaymode Description of settingsINT MIC (Camera) Determines whether or not input from the internal microphone is usedduring recording.ON: Uses internal microphone input.OFF: Does not use internal microphone input.DISPLAY SETUP screenItem Displaymode Description of settingsZEBRA DETECT 1 (Camera) Selects the brightness level of the left-leaning zebra patterns on thescreen.50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%ZEBRA DETECT (Camera) Selects the brightness level of the right-leaning zebra patterns on thescreen.50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%,OFFThe zebra patterns do not appear if you select OFF.MARKER (Camera) Select ON to display the marker. (Page 39)ON, OFFTo display the marker, press the ZEBRA button.SAFETY ZONE (Camera) Sets SAFETY ZONE to ON or OFF.OFF, 90%, :, 1:9, 1:9FOCUS BAR (Camera) Turns the FOCUS ASSIST bar display ON or OFF.ON, OFFWhen set to ON, the FOCUS ASSIST bar can be displayed.VIDEO OUT OSD (Camera)(MCR)Select ON to output the information displayed on the screen togetherwith the signals from the VIDEO IN/OUT jack.ON, OFFDATE/TIME (Camera)(MCR)Sets whether to display the date and time on the screen and whether tooutput from the VIDEO IN/OUT jack.OFF:The date and time are not displayed.TIME:The time is displayed.DATE:The date is displayed.TIME&DATE:The time and date are displayed.LEVEL METER (Camera)(MCR)Select ON to display the audio level meter.ON OFFZOOM·FOCUS (Camera) Selects the unit of zoom and focus values.OFF, NUMBER, mm/feet, mm/mUse the mm/feet or mm/m display only as a general guideline since it isnot entirely accurate.CARD/BATT (Camera)(MCR)Select ON to display the remaining P2 card recording capacity andremaining battery charge.ON, OFFPCARD REMAIN (Camera)(MCR)Determines how remaining P2 card capacity is displayed.ONE-CARD: Displays how much space is left on the P2 card that iscurrently being recorded.TOTAL: Displays the total amount of space that is left on P2 cardsinserted in the camera.___indicates the factory setting.AV IN/OUT SETUP screen (continued)
