Shooting5Using focus assistPressing the FOCUS ASSIST button magnifiesthe center portion of the image or brings up afrequency distribution graph at the top right of theimage to assist during manual focusing.You can use the FOCUS ASSIST setting onthe SW MODE screen to change the viewfinderand LCD monitor displays that appear when theFOCUS ASSIST button is pressed. (Page 102)FOCUS ASSIST buttonEXPANDED:Doubles the size of the center of the image.GRAPH:Displays a frequency distribution graph at the topright in the viewfinder and LCD monitor.Turn the focus ring on the lens to place the graphfurther to the right.Out of focus The white area movesto the right as the imagecomes into focus.BOTH:Magnifies the center portion of the image anddisplays the frequency distribution graph.The image on the LCD monitor may differ slightlyfrom the image in the viewfinder when theFOCUS ASSIST button is used in EXPANDEDmode.The EXPANDED mode is available during 1080iand 720P HD mode recording and standby, butdues not work in external input mode.In the 576i SD format, only the GRAPH display isavailable. When set to the EXPANDED mode, thefocus assist function does not work. Even whenthe BOTH mode is set, only the GRAPH displayis available.The FOCUS ASSIST button does not work whenthe digital zoom function is used.To return to the previous screen, press the FOCUSASSIST button again.••••Iris adjustmentsIRIS dial FOCUS RING (FOCUS/IRIS) switchIRIS button1 If the camera is in auto mode, use theAUTO/MANUAL switch to switch to manualmode. (Page ) Press the IRIS button to switch how toadjust the aperture of lens.AUTO IRIS: Adjust the iris automatically.MANUAL IRIS: Adjust the iris manually. Turn the IRIS dial to adjust the aperture oflens when in the manual iris mode.In the auto iris mode, the lens iris can becorrected using this dial.Set the direction of the IRIS DIAL and aperturecontrol in the setup menus, SW MODE screen,IRIS DIAL. (Page 100)If you have set ON under A.IRIS on the settingmenu AUTO SW screen, auto iris will be forciblyselected when auto mode has been established.(Page 102)Setting the FOCUS RING (FOCUS/IRIS) switchto IRIS allows you to set aperture using thefocus ring on the lens. Note that since the focusring now does not control focus adjustment, setthe FOCUS switch to A (AUTO) focus control.(Page 34)This unit’s iris F number when it is open is F1.6at full WIDE and F3.0 at full TELEPHOTO.The iris display in the viewfinder or on the LCDwhen the iris is open is OPEN at full WIDE andF2.8 or OPEN at full TELEPHOTO.•