1Chapter ManipulatingClipswithThumbnailsREC RATE:The recording frame rate is displayed. (Onlydisplayed for clips recorded using native recordingwith the VFR function.)5 Clip Meta DataDisplays more detailed data about the clip. Use thecursor buttons to move the pointer, and press theSET button to check the detailed content. For moreinformation on displayed metadata, see [Setting of ClipMeta Data] (page 115).Modification of recorded clip metadata1 Displaythewindowfordetailedclipmetadatathatyouintendtomodifyintheclippropertieswindow.2 Placethecursorontheitemtobemodifiedusingthecursorbutton.• The metadata that can be modified are shown like[CREATOR] in the following figure.3 PresstheSETbutton.• The input window (soft keyboard) for modifyingmetadata is displayed.• Use the keyboard to modify the metadata.Use the keyboard operations described in[Checking and modifying read metadata](page 116).4 PressOKonthekeyboardtowritethemodifiedmetadataontheclipandreturntothemetadatawindow. NOTE• LOCATION (recording location data) data for a SHOOT cannotbe deleted independently. Thus by setting ALTITUDE to emptywill also delete the LONGITUDE and LATITUDE settings.• The metadata for a clip with the ! incomplete clip indicatorcannot be modified. Metadata on clips recorded on multipleP2 cards must be modified when all P2 cards that contain thedata are inserted.• Any MEMO with 101 characters or more cannot be modified.P2 Card Status Display P2 Card Status Display SettingsSelect PROPERTY CARD STATUS from the thumbnailmenu to set the desired indication mode (remaining freespace or used memory capacity) for the P2 card statusdisplay.1 PresstheTHUMBNAILbutton.• The thumbnail screen appears on the LCDmonitor.2 PresstheTHUMBNAILMENUbuttonandselectPROPERTYPROPERTYSETUPPCARDCAPfromthethumbnailmenu.• The following screen appears. Select the P2 cardstatus display settings from the P2 CARD CAPmenu option.REMAIN:Show remaining free space on the P2 card asthe P2 card status display. (Factory setting)USED:Show used memory capacity on the P2 card asthe P2 card status display.
