1Chapter PartsandtheirFunctionsAudio (output) Function Section15 73 42 61 MONITOR SELECT (audio channel) CH1/2, CH3/4selector switchUse this switch to select the audio channel whosesignals are output to the speaker, earphones or AUDIOOUT connectors.CH1/2: Signal output of audio channels 1 and 2.CH3/4: Signal output of audio channels 3 and 4.The channel indications of the audio level meters in theviewfinder and on the LCD monitor show the channelsselected with this switch.2 MONITOR SELECT (audio selection) CH1/3, ST,CH2/4 selector switchThis switch and the MONITOR SELECT CH1/2, CH3/4switch select the audio signal output to the speaker,earphones and AUDIO OUT connectors.MONITOR SELECTswitch (left)MONITOR SELECT switch (right)CH1/2 CH3/4MONITORSELECTCH1/3 Audio Channel 1 Audio Channel 3STStereo signalsfrom AudioChannels 1 and 2*1Stereo signalsfrom AudioChannels 3 and 4*1CH2/4 Audio Channel 2 Audio Channel 4*1 MIX in the menu option MONITOR SELECT in theAUDIO SETUP screen allows you to change stereosignals to a mixed signal.3 MONITOR (volume) controlUse to control the alarm sound volume and volume ofsound output from the monitor speaker and earphones.4 SpeakerThe speaker outputs EE sound during recording andreproduced sound during playback. The speaker emitsan alarm sound when the warning lamp and indicatorlight or blink. EE sound and reproduced sound are notoutput during alarm sound output.When earphones are connected to the PHONESconnector, the sound from the speaker is automaticallymuted.5 PHONES (earphones) jack (mini jack)This connector is designed for audio monitoring (stereo)earphones.6 DC OUT (DC power supply) output socket.This is a 12 V DC output socket that provides amaximum current of 1.5 A. NOTEBe sure to check polarity before connecting an externaldevice as incorrect connection could lead to damage.7 AUDIO OUT connector• This connector outputs audio signals recorded onaudio channels 1/2 and 3/4.• Use the MONITOR SELECT CH1/2, CH3/4 selectorswitch to select output signals.
