0Chapter AdjustmentsandSettingsforRecording5 SelectWRITEandpresstheJOGdialbutton,thenselectEXECUTEandpresstheJOGdialbutton.PUSH MENU TO RETURNREADWRITEFILE 1FILE 2FILE 3FILE 41>>>RETURNEXECUTENO FILETITLE RELOAD >>>NO FILENO FILESCENE FILESCENE FILE(SD CARD)6 Pressthecursorbutton,turntheJOGdialbuttontomovetoYESandagainpresstheJOGdialbutton.• In the following example, TITLE 1 is the filename.• When writing is completed, WRITE OK appears.PUSH MENU TO RETURNYESNOTITLE EDITT I T L E 1PUSH SETWRITE FILE 1SCENE FILE(SD CARD)To load a filePerform steps 1 to 4. Select READ in step 5, selectEXECUTE and press the JOG dial button. READ OKappears when loading completes.Like scene files, process user files by using the menuoption USER FILE in the CARD FUNCTION screen.Reloading Files From an SD Memory CardPerform steps 1 to 3, move to TITLE RELOAD so that YESis displayed in step 5, and press the JOG dial button.The file is reloaded.To title a file1 Performsteps1to.2 UsetheJOGdialbuttontoselectcharacters,thenpresstheJOGdialbuttontomovetothenextcharacter.• You can input any of the following characters:Space, A to Z, 0 to 9, : ; < = > ? @ [ \ ] ^_-./• You can erase all characters using the RESETbutton.3 Whenallentrieshavebeenmade,movethecursortotherightoftheenteredtitle.4 SelectYESandpresstheJOGdialbutton.PUSH MENU TO RETURNYESNOTITLE EDITT I T L E 1PUSH SETWRITE FILE 1SCENE FILE(SD CARD)• “WRITE OK” appears when the title is written. NOTE• If WRITE NG FORMAT ERROR appears, format the SDmemory card.• If WRITE NG WRITE PROTECT appears, change the lock tabposition to enable writing.• If WRITE NG CANNOT ACCESS appears, quit all otheroperations (such as playback) before proceeding.• If WRITE NG ERROR appears, the SD memory card may bedefective. Replace it.
