Chapter AdjustmentsandSettingsforRecording3 Backup unit displays• The following indications show the status of backupunits connected to the DVCPRO/DV connector.• The following indications are not displayed whenthe menu option 1394 CONTROL in the OTHERFUNCTIONS screen is set to OFF.• 1394 *: Recording• 1394 h: Recording standby• 1394 :The backup unit cannot be controlled.• 1394: No backup unit is connected.• 1394 – –:A backup unit is connected but is not inrecording or recording standby status.4 Recording format and system frequency indication• System mode• 1080i• 720P• 576i (480i)• Recording format(In 1080i, 720P system mode)• AVC-I 100: AVC-Intra 100 format• AVC-I 50: AVC-Intra 50 format• DVCPRO HD: DVCPRO HD format(in 576 (480i) system mode)• DVCPRO50, DVCPRO, DV• System frequency• 50 : 50 Hz• 60 : 59.94 Hz5 Information displayThe following information is displayed depending on thesituation.• Performance of auto white balance and auto blackbalance• Warning and error indication• Information on switch and button operationsFor details, refer to [Center Information Display](page 74).6 Proxy information display (optional)This display provides information on proxy card errorsand time remaining in proxy recording on an SDmemory card.7 Letter box recording displayThis display appears in the 576i (480i) recording formatwhen LETTER BOX is selected in the menu optionASPECT CONV in the SYSTEM SETUP screen.8 Y GET brightness displayWhen the Y GET function is used, the image level at thecenter of the image is indicated in a range between 0%and 109%9 CalendarMonth:Year: 2000 – 2037SecondsHoursDay of the monthMinutesmmm dd yyyy hh:mm:ssJAN (January), FEB (February),MAR (March), APR (April), MAY (May),JUN (June), JUL(July), AUG (August),SEP (September), OCT (October),NOV (November), DEC (December)10 Recording/playback frame rate displayIn native recording, the capture frame rate andrecording and playback frame rates are displayed.Example: 50:25PN (recording 50P with the cameraframe rate set to a variable frame rate of25PN)Playback applies a 2:2 pull-down to perform 25P over50P, indicating that 25/50 speed slow playback isperformed.In standard recording only the capture frame rate isindicated.Example: 25P (recording 25P using 2:2 pulldown forover 50i recording)11 Audio level meter displayHEADROOM at-1dBCH 1-18dB 0dBCH 2HEADROOM at-0dBCH 1-20dB 0dBCH 2By assigning MAG A. LVL (level meter magnification)to a user button makes it possible to switch to displaymagnification.For details, refer to [Audio level meter magnification](page 78).12 Shutter speedThe shutter speed is displayed here.In synchro scan mode, the display (time (minutes)display or shutter angle icon display) made in the menuoption SYNC SCAN DISP in the DISPLAY SETUP screenis used.13 DRS displayThis indicates operation of the dynamic range stretcherfunction.14 Iris displayDisplays F values.• NC appears when the lens connector is notconnected.15 Auto-iris control displays• SPOT: Auto iris control for spot light• BACK: Auto iris control for backlight compensationThis indication also appears when the lens is set tomanual iris, but is not active.
