Chapter Preparation NOTE• The camera can load up to 8 files.When an attempt is made to load a new file while 8 files havealready been loaded, “READ NG CAC FILE FULL” appears. Toload a new file, delete an existing file before loading the newfile.For details, see [Deleting CAC File] (page 99).• “READ NG FORMAT ERROR” indicates the file cannot beused and will not be loaded. Make sure the file is in a formatthe camera supports and that the file on the SD card is notcorrupted.Deleting CAC File1 OpentheLENSSETUPscreen.For details on menu operation, refer to [Using themenus] (page 125).2 UsetheJOGdialbuttontoselectCACFILEDELETE,selectEXECUTEandpresstheJOGdial.PUSH MENU TO RETURNSHADING(USER)CACCAC PROPERTYCAC CARD READCAC FILE DELETECAC FILE INITDEFAULT>>>ON>>>>>>IRIS ADJUST >>>RETURNEXECUTESHADING SELECTLENS SETUP3 UsetheJOGdialtoselecttheCACfiletobedeleted.ThenselectYESandpresstheJOGdialbutton.“-----” is indicated when deletion ends.PUSH MENU TO RETURN1:XT17X4.5BRM-K14CAC FILE DELETE2:3:4:5:6:7:8:NOYESCAC FILE NO:1 DELETE?CAC FILE DELETEPUSH SETInitializing CAC File (Returning Data toTheir Factory Defaults)1 OpentheLENSSETUPscreen.For details on menu operation, refer to [Using themenus] (page 125).2 UsetheJOGdialbuttontoselectCACFILEINIT.ThenselectYEStodisplaytheconfirmationscreen.PUSH MENU TO RETURNSHADING(USER)CACCAC PROPERTYCAC CARD READCAC FILE DELETECAC FILE INITDEFAULT>>>ON>>>>>>IRIS ADJUST EXECUTE>>>RETURNSHADING SELECTLENS SETUP3 SelectYESintheconfirmationscreenandpresstheJOGdialbutton.• CAC FILE INIT PROCESSING COMPLETED(these three appear in succession) to indicate thatinitialization has been completed.• The LENS SET UP screen appears aftercompletion.NOYESCAC FILE INITIAL?CAC FILE INITPUSH SET NOTEThis operation deletes all files loaded into the camera andreturns the four CAC data files to their factory defaults.
