Panasonic AG-HPX301E Operating Instructions Manual
Also see for AG-HPX301E: Replacement parts list
                                                                                                                                                                            | |
Contents
|
1Chapter PartsandtheirFunctions20 P2 CARD ACCESS LEDThis LED indicates the recording and playback status ofeach card.For details, refer to [P2 CARD ACCESS LED and statusof P2 cards]. (page 29)21 GENLOCK IN connectorThis connector inputs a reference signal when thecamera unit is gen-locked, or when the time code isexternally locked. NOTE• Supply an HD Y signal (1080/50i (59.94i), 720/50P (59.94P))or a composite signal (576/50i (480/59.94i)) as inputreference signal. The subcarrier of VIDEO OUT connectoroutput (composite signal) cannot be externally locked. InSD mode, the signal will not lock to the HD signal.22 REMOTE connectorSome functions can be remote controlled when theremote control unit AJ-RC10G (optional accessory) isconnected to the camera.For details, refer to [Connecting the AJ-RC10G RemoteController] (page 105).23 VIDEO OUT connectorThis connector outputs video signals.• In HD mode, down-converted composite videosignals are output.• Use the menu option DOWNCON MODE in theOUTPUT SEL screen to set signal output. (The factorysetting is LETTER BOX.)24 SD memory card slotInsert an SD memory card (optional accessory) in thisslot. It is used for recording and loading camera settingmenus or lens files, uploading meta data and recordingproxies (optional). NOTESD memory card precautions• Use only SD memory cards that conform to the SDstandard or the SDHC standard in this camera.• MultiMediaCards (MMC) cannot be used. (Use of suchcards may prevent recording.)• Be sure to use mini SD card adapters when using miniSD cards with this camera. (Note that this camera willnot operate normally when a mini SD adapter is installedwithout inserting a card. Be sure to insert a card when anadapter is installed.)• Use of Panasonic SD memory cards and mini SD cardsis recommended. Be sure to format such cards in thiscamera.• This unit supports the following SD and SDHC memorycard capacities.SD memory cards8MB/16MB/32MB/64MB/128MB/256MB/512MB/1GB/2GBSDHC memorycards4GB/6GB/8GB/12GB/16GB/32GBFor proxy (optional) recording, use 256 MB, 512 MB, 1 GB,2 GB SD memory cards labeled “High Speed” or SDHCmemory cards.• For the latest information not available in the OperatingInstructions, visit the P2 Support Sites at the followingWeb site.https://eww.pavc.panasonic.co.jp/pro-avAbout SD and SDHC memory cards• The SDHC card is a new standard, established by theSD Card Association in 2006, for memory cards withcapacities of 2 GB or more.• The SD logo is a registered trademark.• MMC (MultiMediaCard) is a registered trademark ofInfineon Technologies AG.25 BUSY (operation mode display) lampThis lamp indicates the active status of the SD memorycard. It stays illuminated when the card is active. NOTEDo not remove the card while the lamp is on.The SD memory card could be damaged.26 DVCPRO/DV connectorAn IEEE1394 standard connector for input and output ofvideo, audio and data.For details, refer to [Connections to the DVCPRO/DVConnector] (page 151).27 SDI OUT 1 connector28 SDI OUT 2 connector• This connector outputs SDI signals.• Use the menu option SDI SELECT in the OUTPUTSEL screen to select AUTO, 1080i or 576i (480i). Thisconnector does not support up-conversion.It outputs the same signals as SDI OUT.29 SCENE FILE dialThis dial allows you to select and load shootingconditions from the scene files prerecorded to each ofthe six positions. NOTEDuring recording, selecting a position with a differentframe rate will not change the frame rate until the camerais set to recording standby mode.For details, refer to [How to use Scene File Data] (page 87).30 FOCUS ASSIST buttonTurns magnification of the center portion of the imageon and off.For details, refer to [Focus assist function] (page 80).31 REC switchSwitches functions of the REC button on the handle.ON: Enables the REC button.OFF: Disables the REC button.32 USB lampThis lamp lights when the camera is in USB mode (PCmode). |
Related manuals for Panasonic AG-HPX301E
Panasonic AG-HPX300 Operating Instructions Manual
Panasonic AG-HPX371E Operating Instructions Manual
Panasonic AG-HPX370 Operating Instructions Manual
Panasonic AG-HPX370P Operating Instructions Manual
Panasonic AG-HPX370P Operating Instructions Manual
Panasonic AG-HPX500 Operating Instructions Manual
Panasonic AG-HPX250 Operating Instructions Manual
Panasonic AG-HPX500P Operating Instructions Manual
Panasonic AG-HPX170P Operating Instructions Manual
Panasonic ag-hpx600p Operating Instructions Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine