Chapter AdjustmentsandSettingsforRecording2 SelectSAVEandpresstheJOGdialbutton.PUSH MENU TO RETURNVFRFRAME RATE(SYNCHRO SCAN)DETAIL LEVELV DETAIL LEVELDETAIL CORINGRETURNLOADSAVEINITIAL0CHROMA LEVEL 000LOAD SAVE INITSCENE FILE3 SelectYESandpresstheJOGdialbutton.• To return to the menu level above, press theMENU button.YESNOSAVE ?SCENE FILEPUSH SET• “PROCESSING” appears and the followingmessage is shown when all settings have beencompleted.SAVECOMPLETED !• After changing the scene file settings, to return to thesettings to the previously saved values, select LOAD instep 2 and perform the operation described in step 3.• To return the scene file settings to their factory defaults,select INITIAL in step 2 and perform the operationdescribed in step 3.• To save and read user file settings or return them totheir factory defaults, open the setting menu OTHERFUNCTIONS screen and run USER FILE in the same wayas when handling scene files.Saving scene files and othersettings on SD memory cardsYou can save up to four scene file settings or other settingsas files on an SD memory card, and you can also loadthem from the card.• Current scene file settings are automatically saved in thecamera and written to an SD memory card. When datahas been read from an SD memory card, the currentsettings are rewritten at the same time as the data savedinside the unit.• The data in all the scene files, F1 to F6, is rewritten.Be sure to read [Handling SD memory cards] (page 86)regarding SD memory handling.The following procedure shows how to save scene files.1 Settheunit’sPOWERswitchtoON.2 SelectthemenuoptionSCENEFILEintheCARDFUNCTIONSscreen,thenpresstheJOGdialbutton.For details on menu operation, refer to [Using themenus] (page 125).3 SelectCHANGEandpresstheJOGdialbutton.• Select the menu option USER FILE for othersettings.PUSH MENU TO RETURNUSER FILESD CARD FORMATRETURNCHANGE>>>SCENE FILECARD FUNCTIONS4 Selectthefilenumber(1to)usingtheJOGdialbutton.• Press the JOG dial button again to confirm thesetting.PUSH MENU TO RETURNREADWRITEFILE 1FILE 2FILE 3FILE 41>>>>>>NO FILENO FILETITLE RELOAD >>>NO FILENO FILESCENE FILESCENE FILE(SD CARD)
