1Chapter MenuOperations5 UsetheJOGdialbuttontochangethesettingvalue.PUSH MENU TO RETURNMID GAINHIGH GAINATWATW TYPEW.BAL.PRESETUSER MAIN0dB6dB12dBOFF1USER1 BACK LIGHT3.2K5.6KLOW GAINSW MODE6 Tochangeothersettings,repeatstepsand.• When you finish, press the MENU button to returnto the function screen.7 Tochangeotherfunctions,repeatstepsto.• To exit the function screen and return to the normalscreen, press the MENU button again. NOTEDirect close functionWhen the MENU button is pressed and held down after makinga menu setting, the setting menu screen closes without firstreturning to the previous setting menu.To quickly change settings (MASTER PED and H PHASEonly)• Fast UPHold down the JOG dial button while turning it upwardsand maintain this position.• Fast DOWNHold down the JOG dial button while turning it downwardsand maintain this position.Initializing the menu settingsThe menu settings contain both the user file settings andthe scene file settings. You can initialize them separately.To initialize scene files (i.e. all thesettings other than the scene filesettings)Select INITIAL in USER FILE of the OTHER FUNCTIONSscreen. The current menu settings of user file will return tothe factory settings.To initialize the scene fileFrom the 6 scene files, select the one you want to initializewith the SCENE FILE dial. Then in the SCENE FILE screen,LOAD/SAVE/INIT, select INITIAL.The settings for only the selected scene file are returned tothe factory settings.• This does not affect the other scene files.Initializing user files and scene filessimultaneouslyYou can return the user files and the six scene files to theirfactory defaults by selecting YES in the menu option MENUINIT in the OTHER FUNCTIONS screen.
