- 102 -≥ It is not possible to adjust the shutter speed to a value slower than the limit imposed by the setframe rate.Example:When [REC FORMAT] is set to [FHD 1080/29.97p 50M], if you set the frame rate to 30 fps, theshutter speed cannot be adjusted to a value slower than 1/30.≥ [BLACK FADE] and [WHITE FADE] are disabled. (l 86)≥ Even if you press the recording start/stop button as soon as recording has started, it may takesome time until the recording stops.≥ The screen may momentarily black out when the frame rate is changed in Step 2.≥ When using Variable Frame Rate (VFR) Mode with a low frame rate setting, this unit may not beable to keep up with changes in the image. In such a case, set the iris, focus and White Balancemode to manual settings.≥ The maximum continuous recordable time for one scene in Variable Frame Rate Mode variesdepending on the set frame rate. Recording stops when a certain time has elapsed since the startof the recording, and restarts automatically a few seconds later.j With undercrank recording: 10 hoursj When recording with the same frame rate as the frame rate in [REC FORMAT]: 10 hoursj With overcrank recording, the recordable time becomes shorter than 10 hours depending onthe ratio between the frame rate for [REC FORMAT] and variable frame rate setting.Example: When [REC FORMAT] is set to [FHD 1080/29.97p 50M]≥ “h” is an abbreviation for hour.≥ Register [FOCUS MACRO] to a USER button. (l 82)You can enable/disable Focus Macro.≥ is displayed on the screen when [ON] is selected.≥ Register [i.ZOOM] to a USER button. (l 82)You can enable/disable i.Zoom. (l 49)≥ Register [USB MODE] to a USER button. (l 82)Enable/disable connection to the USB ports of this unit.≥ If you switch the setting from on to off while a USB port is in use, a message may be displayed,instructing you to unmount the USB cable safely. Select [YES] to terminate the connection safely.Variable frame rate setting Maximum continuous recordable time forone scene2 fps 10 h30 fps60 fps 5 h[FOCUS MACRO][i.ZOOM][USB MODE]
