- 148 -≥ [SSID(SELECT)] is available only when [USB MODE] is set to [ON], [USB MODE SELECT] is setto [HOST] and a wireless module that supports this unit is attached.≥ Depending on your environment, the communication speed may become slower or the wirelessaccess point may not be available for use.≥ When [DHCP] in [Wireless LAN setup] is set to [OFF] or [CLIENT], apply the [IP Address] settingto [AG ROP] in [Settings] (l 145) on the iPad. For details, refer to [CONNECTION] in Help of theAG ROP app.∫ Setting up a connection manually≥ Attach a wireless module that support this unit to the USB HOST terminal of this unit.(l 142)≥ Set [USB MODE SELECT] to [HOST]. (l 197)≥ Set [USB MODE] to [ON]. (l 197)1 Select the menu.2 Touch and set the desired items as needed.≥ All default settings are indicated with underlined text.≥ When [SSID(MANUAL)] is selected, [BAND] is fixed to [2.4GHz], and [CHANNEL (2.4GHz)] and[CHANNEL (5GHz)] are fixed to [AUTO].≥ For details on how to enter characters, refer to page 144.3 Touch [EXIT].4 Check the network connection.≥ When the connection is complete, is displayed on the screen of this unit.≥ To terminate the connection, after terminating the connection on the iPad side, set [USB MODE]to [OFF].≥ Depending on your environment, the communication speed may become slower or the wirelessaccess point may not be available for use.≥ When [DHCP] in [Wireless LAN setup] is set to [OFF] or [CLIENT], apply the [IP Address] settingto [AG ROP] in [Settings] (l 145) on the iPad. For details, refer to [CONNECTION] in Help of theAG ROP app.: [NETWORK SETUP] # [WIRELESS SETUP]# [SSID(MANUAL)][SSID]: Enter the SSID for the wireless access point to connect to.≥ This item is not set by default.[SECURITY TYPE]: Set the network authentication and encryption types.[WPA2-AES]/[WPA-AES]/[WPA2-TKIP]/[WPA-TKIP]/[NONE][Password]: Enter the password for the wireless access point to be connected.≥ This item is not set by default.≥ This item is not available when [SECURITY TYPE] is set to [NONE].MENU