- 146 -Connecting this unit and an iPad≥ Change the mode to Recording Mode. (l 31)If you switch to Recording Mode while this unit is connected in Playback Mode, the connection maybe terminated to restart this unit. We recommend setting this unit to Recording Mode before makinga connection.∫ Settings to be made on the iPadFor information on the settings to be made on the iPad, refer to [CONNECTION] in Help of the AGROP app.∫ Icons to be displayed during connectionConfigure the settings in this section to directly connect this unit and the iPad.≥ Attach a wireless module that support this unit to the USB HOST terminal of this unit.(l 142)≥ Set [USB MODE SELECT] to [HOST]. (l 197)≥ Set [USB MODE] to [ON]. (l 197)1 Select the menu.2 Touch and set the desired items as needed.≥ All default settings are indicated with underlined text.Wireless LAN connection:connected/ not connected≥ The display will change as follows according to the radiowave intensity: (Weak) # # # (Strong).AG ROP application connection:connected≥ The display will change as follows according to the radiowave intensity: (Weak) # # # (Strong).Connecting directly: [NETWORK SETUP] # [WIRELESS SETUP] # [DIRECT][SSID]: Enter the network name (SSID) for this unit.[BAND]: Select the frequency band to be used.[2.4GHz]/[5GHz][CHANNEL (2.4GHz)]: Sets the channel to be used for 2.4 GHz.[AUTO]/[CH1]/[CH6]/[CH11][CHANNEL (5GHz)]: Sets the channel to be used for 5 GHz.[AUTO]/[CH36]/[CH40]/[CH44]/[CH48]/[CH149]/[CH153]/[CH157]/[CH161]/[CH165][Password]: Sets the password.≥ The default setting is [01234567890123456789abcdef].MENU
