- 53 -∫ To change the way you adjust focus with the focus ringSelect the menu.∫ To emphasize the outline of imagesSetting [EVF/LCD DETAIL] to [ON] helps you achieve focus easier by emphasizing the outlines ofan image displayed on the LCD monitor and viewfinder.You can also adjust the emphasis level or change the frequency.≥ You can also enable or disable this function with the applicable USER button. (l 91)≥ These settings will not affect the images actually recorded.Adjusting the level of [EVF/LCD DETAIL]1 Select the menu.2 Touch / to adjust settings.≥ You can select a value between s3 and r3.3 Touch [EXIT] to complete the setting.Setting the peaking frequency of [EVF/LCD DETAIL]Select the menu.≥ [EVF/LCD DETAIL] is canceled in following cases:j If you use Focus Assist (peaking) (l 56): [SW SETUP] # [FOCUS RING DRIVE][SPEED]: Adjusts the focus value according to the speed at which the focus ring isrotated.[COARSE]: Adjusts the focus value according to the rotational position of the focusring. Since the operation of the focus ring results in a greater change infocus value, this setting is suitable for making rough adjustments.[FINE]: Adjusts the focus value according to the rotational position of the focusring. Since the operation of the focus ring results in a smaller change infocus value, this setting is suitable for making fine adjustments.: [DISP SETUP] # [EVF/LCD DETAIL] # [ON]: [DISP SETUP] # [EVF/LCD PEAK LEVEL]: [DISP SETUP] # [EVF/LCD PEAK FREQ.] # [HIGH] or [LOW]MENUMENUMENUMENU
