- 108 -Switching the screen indications/mode informationdisplay* When [DATE/TIME] is set to [TIME], [DATE], or [DATE&TIME]≥ To cancel the setting, press the DISP/MODE CHK button.∫ To display the Mode InformationPress and hold the DISP/MODE CHK button to display the mode information screen first. Each timeyou press the button, the display mode of the screen switches in the following order:Mode information display1 # Mode information display2 # Mode information display3 #Mode information display4 # Mode information display5 # Normal displayDISP/MODE CHK buttonWhen the DISP/MODE CHK button is pressed, all screen displays disappear, except for thecounter display, time stamp display*, zebra pattern display, marker display, and safety zonedisplay. (l 203)Mode information display1: Displays the list of functions assigned to the USER buttons(USER1 to 9).Mode information display2: Displays the title given to each scene number of a scene file.Mode information display3: Displays the settings assigned to the GAIN button ([GAIN L]/[GAIN M]/[GAIN H]), the White Balance mode settings assigned tothe WHITE BAL button ([WHITE BAL A]/[WHITE BAL B]/[WHITEBAL PRST]), and the setting status of the White Balance modes[Ach] and [Bch] ([AWB A]/[AWB B]).Mode information display4: Displays the settings for [REMOTE REC], [REMOTE REC LINK],[HDMI TC OUTPUT], [CAMERA NUMBER], [SUB REC BUTTON]and [SUB ZOOM].Mode information display5: Displays the settings for [AUDIO LOW CUT CH1], [AUDIO LOWCUT CH2], [AUDIO LEVEL CH1], [AUDIO LEVEL CH2], [INPUT1LINE LEVEL], [INPUT2 LINE LEVEL], [INPUT1 MIC LEVEL] and[INPUT2 MIC LEVEL].