- 56 -Push AFIf you press and hold the PUSH AUTO button, Manual Focus will be temporarily switched to AutoFocus.≥ Set this unit to Manual Focus. (l 52)Press and hold the PUSH AUTO button.≥ The focus position will be automatically adjusted for the subject at the center of the screen.≥ If you set [AREA MODE] to [FOCUS], [FOCUS/IRIS] or [FOCUS/Y GET] and use Area Mode, thefocus position will be automatically adjusted to the subject you have touched. (l 90)≥ It will be canceled when the button is released, and the focus position set by the Push AF will bemaintained.≥ You can also use Push AF with the USER button to which [PUSH AUTO] is registered. (l 82)≥ Push AF does not work in following cases:j When Auto Focus is usedFocus AssistYou can use Focus Assist by pressing the FOCUS ASSIST button or the USER button to which[FOCUS ASSIST 1] or [FOCUS ASSIST 2] is registered.≥ For information on how to set the USER buttons, refer to page 82.∫ To select the Focus Assist method for the FOCUS ASSIST button orthe USER button to which [FOCUS ASSIST 1] is registeredSelect the menu.∫ To select the Focus Assist method for the USER button to which[FOCUS ASSIST 2] is registeredSelect the menu.≥ You can use the magnified display and the peaking function separately or use them incombination by selecting different settings for [FOCUS ASSIST 1] and [FOCUS ASSIST 2].≥ If [FOCUS ASSIST 1] is set to [BOTH], [FOCUS ASSIST 2] is not available. In addition, the USERbutton to which [FOCUS ASSIST 2] is registered is disabled.Selecting a Focus Assist method: [SW SETUP] # [FOCUS ASSIST 1] # desired setting[EXPAND]: Magnifies the central area of the screen when Focus Assist is used.[PEAKING]: Highlights in-focus portions with color when Focus Assist is used.[BOTH]: Sets both [EXPAND] and [PEAKING].: [SW SETUP] # [FOCUS ASSIST 2] # desired setting[EXPAND] / [PEAKING]MENUMENU