- 218 -∫ If AVCHD scenes do not change smoothly when played back onanother deviceThe images may be still for several seconds at the joins between the scenes if the followingoperations are performed when multiple scenes have been continuously played back using anotherdevice.≥ Just how smoothly the scenes will be played back depends on the playback device. Dependingon the device used, the images may stop moving and become still for a moment even when noneof the following conditions are applicable.≥ A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at every4 GB of data when played back with another device.With a PCProblem Check pointsWhen connected by theUSB Cable, this unit is notdetected by the PC.≥ After re-inserting the SD card into the unit, reconnect the USBCable.≥ Select another USB terminal on the PC.≥ Check the operating environment. (l 132)≥ Connect the USB Cable again after restarting the PC andturning on this unit again.When the USB Cable isdisconnected, an errormessage will appear onthe PC.≥ To disconnect the USB Cable safely, double-click theicon in the task tray and follow the instructions on the screen.OthersProblem Check pointsIf the SD card is inserted inthis unit, it is notrecognized.≥ If the SD card is formatted on a PC, it may not be recognizedby this unit. Use this unit to format SD cards. (l 42)Principal reasons for not playing back smoothly≥ The recording format [PS] was switched to another recording format when a scene wasrecorded≥ When the scenes were recorded on different dates≥ When scenes lasting under 3 seconds have been recorded≥ When PRE-REC was used for recording≥ When the Interval Recording is used≥ When deleting scenes≥ When scenes recorded more than 99 scenes on the same date
