- 157 -≥ By default the following values are set for [F1:] in [FILE SELECT]j SAT: “0”j PHASE: “0”Adjustment of black level based on the image is performed.1 Touch [MASTER PED].2 Touch / to adjust the black level.≥ You can select a value between s150 and r150.3 Touch [EXIT] to exit the menu screen.≥ The default setting that is assigned to [F1:] in [FILE SELECT] is “0”.Tone or contrast of the image is set in accordance with the recorded scenes.1 Touch [GAMMA MODE].2 Touch / to select the setting item.3 Touch [EXIT] to exit the menu screen.≥ When [CINE-LIKE V] or [CINE-LIKE D] is selected, we recommend that you set the lens apertureto a level lower than the normal lens iris level (approximately 1/2) to fully utilize the feature of theselected setting.This sets the gamma curve of dark areas.1 Touch [BLACK GAMMA].2 Touch / to adjust settings.≥ You can select a value between s8 and r8.≥ Making adjustments in the – direction compresses dark areas, while making adjustments in the +direction expands them.3 Touch [EXIT] to complete the setting.≥ The default setting that is assigned to [F1:] in [FILE SELECT] is “0”.[MASTER PED][GAMMA MODE][HD]: This is the video gamma feature for HD (High Definition).[SD]: This increases gain in darker areas more than [HD] does.[FILMLIKE1]: This feature reproduces highlight areas more than [HD] does.[FILMLIKE2]: This feature reproduces highlight areas more than [FILMLIKE1] does.[FILMLIKE3]: This feature reproduces highlight areas more than [FILMLIKE2] does.[CINE-LIKE V]: This gamma feature creates cinematic images with sharper contrast.[CINE-LIKE D]: This gamma feature creates cinematic images.[STILL-LIKE]: Expresses colors in a picture tone similar to that produced with a digitalstill camera.[BLACK GAMMA]
