- 200 -This will set/clear the Password to limit the startup of the [NETWORK SETUP] menu.By setting the Password, it will prevent erroneous operation, prevent wrongful use of the wirelessLAN function by third party, and protect the set personal information.1 Touch [Setup].2 Enter a password (six characters).≥ After finish entering the Password, touch [Enter].≥ For details on how to enter characters, refer to page 144.3 Re-enter the password.≥ After finish entering the Password, touch [Enter].≥ If the Passwords match with each other, a message is displayed.≥ After setting a password, you will be required to enter it each time you touch the [NETWORKSETUP] menu.≥ If you have forgotten the password, from the menu, select [OTHER FUNCTION] # [INITIAL SET]# [NETWORK]. This will reset the [NETWORK SETUP] menu to the default settings, allowingyou to use it again.MaintenanceThe version of the firmware of this unit is displayed.The firmware of this unit is updated.This displays the operation time of this unit, how many times the zoom lever has been operated,how many times the zoom motor has worked and how many times the jog dial has been pressed.[NETWORK SETUP PASSWORD][Setup]/[Delete]: [MAINTENANCE] # desired setting[VERSION][UPDATE]For the latest update information, check the support website below.(As of November 2016)http://panasonic.jp/support/global/cs/e_cam(This Site is English only)[HOUR METER]MENU
