- 59 -≥ Peaking may not be displayed when you use Digital Zoom (l 87). To zoom in and use peaking atthe same time, we recommend increasing the magnification level of the magnified display bysetting [FOCUS ASSIST 1] to [BOTH] or by using the magnified display and the peaking functionin combination.(Notes on the peaking of Focus Assist)≥ When EVF/LCD detail is enabled, Focus Assist is canceled. (l 53)(Notes on the magnified display of Focus Assist)≥ Some information on the screen disappears when the screen is magnified.≥ In the following cases, the screen is not magnified during Focus Assist:j During motion picture recording or PRE-REC (l 95, 183)j When using Digital Zoomj When using Area Mode (l 90)j During auto recording (l 98)j During Super Slow Recording (l 103)j In Variable Frame Rate Mode (l 100)j During AG ROP application connection (l 141)≥ If you set the magnification level of the magnified display to 5.5k or higher, peaking may not bedisplayed when using i.Zoom (l 48).Manual Focus AssistFocus is automatically adjusted after you adjust it with the focus ring in Manual Focus Mode.≥ Focus may not be achieved when the focus deviation is great.≥ After automatic adjustment is complete, the focus is not adjusted automatically again until youoperate the focus ring.≥ Switch to Manual Focus Mode. (l 52)1 Select the menu.≥ Touch [EXIT] to complete the setting.≥ The on-screen icon changes from [MF] to [MA].2 Adjust the focus by rotating the focus ring.≥ Focus is automatically adjusted after you adjust it with the focus ring.≥ The color of the on-screen icon for the focus value changes during automatic adjustment.≥ This function is not available in the following cases:j When Auto Focus is usedj During Super Slow Recording (l 103)j In Variable Frame Rate Mode (l 100)≥ The on-screen icon changes to in the macro range.≥ Manual focus assist does not work in following cases:j When adjusting the focus with the remote control (commercially-available) (l 125): [SW SETUP] # [MF ASSIST] # [ON]MENU
