- 45 -Automatic Tracking White BalanceThe Auto Tracking White (ATW) Balance function of this unit automatically adjusts the WhiteBalance according to the lighting condition.If Auto Tracking White Balance does not work correctly, switch to Manual Mode first, and then adjustthe White Balance. (l 63)Auto FocusThe unit focuses automatically.≥ Auto Focus does not work correctly in the following situations. Record pictures in the ManualFocus Mode. (l 52)j Recording distant and close-up objects at the same timej Recording a subject behind dirty or dusty windowj Recording a subject that is surrounded by objects with glossy surfaces or by highly reflectiveobjects∫ Controls that are disabled in Auto ModeCertain controls of this unit may be disabled in Auto Mode. Controls to be disabled vary by the[AUTO SW] menu settings.[AF][ON]: Activates Auto Focus in Auto Mode.[OFF]: Activates Auto Focus as a manual mode. Focus is adjustedaccording to the functions of the FOCUS A/M/¶ switch.Conditions that disable controls Controls that are disabled in Auto Mode[A.IRIS] is set to [ON]. Iris Ring, IRIS button[AGC] is set to [ON]. GAIN button, the USER button to which [SUPER GAIN]is registered[AUTO SHUTTER] is set to [ON]. SHUTTER button[ATW] is set to [ON]. WHITE BAL button[AF] is set to [ON]. Focus ring, FOCUS ASSIST button, FOCUS A/M/¶switch, PUSH AUTO button, the USER button to which[FOCUS ASSIST 1], [FOCUS ASSIST 2], [PUSH AUTO]or [FOCUS TRANS] is registeredMenu item Setting