- 152 -≥ This function’s default setting is [F1:].≥ It is possible to switch the scene number by touching to while displaying the operationicons. (l 109)≥ You can rename the titles for scene numbers (FLUO, etc.) in [NAME EDIT].≥ It will return to the default settings when [SCENE] is selected in [INITIAL SET]. (l 198)You can rename the title of the scene number selected in [FILE SELECT].1 Touch [NAME EDIT].2 Enter the desired title.≥ For information on how to enter characters, refer to page 144.≥ Up to 6 alphanumeric characters can be entered.≥ Touch [Return] to return to the previous screen. (The title will not be renamed to the one that hasbeen entered.)3 Touch [Enter].≥ The title will be updated.You can save the scene file settings to the SD card or load them from the SD card to this unit.(l 98)Sets the initial Synchro Scan setting.≥ Depending on the size and frame rate in [REC FORMAT], the setting range varies. (l 161)1 Touch [SYNCHRO SCAN].2 Touch / to adjust settings.3 Touch [EXIT] to complete the setting.∫ Note on the [SYNCHRO SCAN] settingA separate [SYNCHRO SCAN] setting is maintained for each size and frame rate in[REC FORMAT].≥ Default settings are indicated with underlined text.[NAME EDIT][LOAD/SAVE][LOAD]/[SAVE][SYNCHRO SCAN]Frame rates [SYNCHRO SCAN] setting59.94p/59.94i 1/60.0 to 1/249.729.97p 1/30.0 to 1/60.0 to 1/249.723.98p 1/24.0 to 1/48.0 to 1/249.624.00p 1/24.0 to 1/48.0 to 1/249.950.00p/50.00i 1/50.0 to 1/250.025.00p 1/25.0 to 1/50.0 to 1/250.0F1: F6:
