- 69 -Gain adjustment≥ Use the jog dial to change the settings.≥ Switch to Manual Mode. (l 44)1 Press the GAIN button to switch to [LOW GAIN], [MID GAIN], or [HIGH GAIN].≥ The setting changes each time you press the button.[LOW GAIN] # [MID GAIN] # [HIGH GAIN]≥ It is possible to register gain values to [LOW GAIN], [MID GAIN], and [HIGH GAIN] and switchbetween these values. (l 168, 169)≥ It is also possible to switch to the desired gain value by pressing the USER button to which[LOW GAIN], [MID GAIN] or [HIGH GAIN] is registered. (l 105)2 Push the jog dial.3 Adjust the gain by rotating the jog dial.Gain value:0 dB to 24 dB≥ Value closer to 0 dB darken the image.≥ Value closer to 24 dB brighten the image.≥ When [EXTENDED SENSITIVITY] is set to [ON], you can set a value between -3 dB and 24 dB.(l 165)≥ The selected gain value is not maintained if any of the following operations is performed:j Pressing the GAIN buttonj Switching to Auto Gain Modej Switching to Infrared Recording Mode (l 92, 183)≥ Auto Gain Mode is activated when one of the following operations is performed:j Setting [AGC] to [ON] and switching to Auto Mode (l 44)j Setting [LOW GAIN], [MID GAIN] or [HIGH GAIN] to [AUTO] and then pressing the GAINbutton to switch to the applicable gain setting.1 Jog dial2 GAIN buttonA Gain value≥ In Auto Gain Mode, “AGC” is displayed; in Manual Gain Mode, the gain value is displayed in dB.B [GAIN]ヴユロバヱヶヴラヴユヵGAIN0dB
