To set/cancel Not Ready mode or to leave Wrap-up mode (To enter Ready mode)PT/PS/KX-UT133/KX-UT136/KX-UT248/KX-UT670/S-PS(Wrap-up)While on-hookPress red or flashing red Wrap-up.*• * The status will be as follows:Ready Not ReadyNot Ready ReadyWrap-up Not Ready• The Log-in/Log-out of a specified group button light shows the current status as follows:Off: Log-in modeRed on: Log-out mode• The Wrap-up button alternates the setting of Wrap-up mode, Not Ready mode or Readymode.The Wrap-up button light shows the current status as follows:Off: Ready modeRed on: Not Ready modeFlashing red: Wrap-up mode• In Wrap-up mode/Not Ready mode, your extension does not receive calls through any group,even if it belongs to multiple groups.• The last remaining logged-in extension may not be allowed to log out, depending on systemprogramming.• The Supervisor extension can control the Log-in/Log-out status of other extensions.For more information, refer to "1.10.2 Monitoring and Controlling the Call Status of anIncoming Call Distribution Group (Incoming Call Distribution Group Monitor)".Customising Your Phone• 3.1.3 Customising the ButtonsCreate or edit a Log-in/Log-out button, a Log-in/Log-out of a specified group button or aWrap-up button.User Manual 2171.10.1 Leaving an Incoming Call Distribution Group (Log-in/Log-out, Wrap-up)
