Feature (While dial tone is heard) Default(New) Additional digits/buttons*3 2.1.2 Time Service Mode Control 780( )– Day/Night/Lunch/Break 0/1/2/3*2 2.1.4 Turning on the ExternalBackground Music (BGM)35( )– To start external pager no. + BGM no. (1 digit)+ BGM no. (1 digit)– To stop external pager no. + 0+ 0*2 2.1.5 Recording Outgoing Messages(OGM)36( )– To record 1 + OGM floating extension no.*6– To play back 2 + OGM floating extension no.*6– To record from an external BGM(MOH) port3 + 1 + OGM floating extension no.*6– To clear 0 + OGM floating extension no.*6*2 2.1.6 Allowing Users to Seize anUnavailable Outside Line (Trunk BusyOut)785( )outside line no. (3 digits)*2 2.1.7 Releasing Network DirectStation Selection (NDSS) Monitor784( )another PBX extension no. + #3.1.1 Customising Your Phone(Personal Programming)799( )Assigning an Extension PIN toYour Extension (Extension PIN[Personal Identification Number])– To set 1 + extension PIN + # + same extensionPIN + #– To cancel 0 + stored extension PIN*1 The UM group’s default floating extension number depends on system programming. For more information, consult your SystemAdministrator or System Manager.*2 Manager only*3 Manager and preprogrammed extension user only*4 Supervisor only*5 Hotel operator only*6 The default of OGM floating extension numbers depends on system programming. For more information, consult your SystemAdministrator or System Manager.*7 The default floating extension number for the SVM feature is 591.User Manual 3815.3.1 Feature Number Table
