Automatic Loginitem DescriptionAuto Login Extension When this item is set to "Enable", you are able to access your mailbox directlywithout entering the mailbox number. You can automatically log in from yourextensions, by calling from an outside telephone whose number is stored asa Caller ID number, or by dialling a telephone number assigned to a specifiedDID number or trunk. When logging in from outside telephones, the TollSaver feature is also available.Auto Login ExtensionPassword EntryRequirementSpecifies if a password is required for the Automatic Login Extension feature.NoticeIf this is set to "No", ensure that unauthorised third-parties are notallowed access to that mailbox.Auto Login Caller ID 1, 2 Specifies the telephone number from which you can automatically be loggedin from. When Caller ID information is received that matches one of thesenumbers, the caller (you) is automatically logged in to the mailbox. Note thatthis telephone number must be unique for each mailbox.Auto Login Caller IDPassword EntryRequirementSpecifies if a password is required for entry when automatic login isperformed using the Caller ID of the number set in Auto Login Caller ID 1or Auto Login Caller ID 2.NoticeIf this is set to "No", ensure that unauthorised third-parties are notallowed access to that mailbox using the number assigned to AutoLogin Caller ID 1 or Auto Login Caller ID 2.Auto Login Toll Saver Allows you to call the Unified Messaging system and know whether or notnew messages have been recorded in your mailbox by the number of ringsyou hear before the Unified Messaging system answers your calls. TollSaver is available under the same conditions as Automatic Login; you canuse Toll Saver when calling from an outside telephone whose number isstored as a Caller ID number, or by dialling a telephone number assigned toa specified DID number or trunk:• Disable: Disables the Toll Saver feature.• DID: Toll Saver functions when the system receives the preprogrammedDID number from the PBX.• Caller ID: Toll Saver functions when Caller ID information is receivedthat matches one of the preprogrammed numbers (Caller ID 1 or 2).• Trunk: Toll Saver functions when the system receives a call on thepreprogrammed trunk.340 User Manual3.2.1 User Programming
