To assign Remote Call Forwarding set1. Log in to the Message Manager’s mailbox.2.53. Select the desired forwarding setting.1for FWD All.2for FWD Busy.3for FWD No Answer.4for FWD Busy or No Answer.5for FWD to Outside, then go to step 6.6for FWD Cancel, then go to step 9.4. Enter the extension number.5.2 to accept the extension number, then go to step 10.• Enter1 to change the extension number, then go to step 4.6. Enter the desired number.1for telephone number 1, then go to step 8.2for telephone number 2, then go to step 8.3for another telephone number.• Before you can forward your calls to telephone number 1 or 2, you should first store thetelephone numbers you plan on using with this feature.7. Enter the telephone number (0 –9 , ). (max. 32 digits)• Make sure you begin the telephone number with an outside line access number (to seize anoutside line).8.2 to accept, then go to step 10.• Enter1 to change the telephone number, then go to step 6.9.2 to accept.10. The new settings are transmitted to the system. If the setting has been completed properly, youwill hear: "Call forwarding accepted" or "Call forwarding is cancelled" as appropriate.• If the system announces, "Call forwarding not accepted. Please check the destinationnumber.", the forwarding setting has not been completed properly, possibly because anonexistent extension number has been entered as the destination. For more information,consult your System Administrator.Setting the Timed ReminderThe Message Manager can set or cancel the Timed Reminder. The telephone will ring at the set time accordingto the set mode (Once/Daily).• This feature is not available for PSs or S-PSs.• This feature is not available when the Message Manager’s extension (assigned for Operator1 in the Day Mode) is "default". In this case, it should be changed to the operator’s extensionnumber. For more information, consult your System Administrator.User Manual 3012.2.2 Message Manager Features
