Personal Custom ServiceItem DescriptionPersonal Custom Service Specifies the Personal Custom Service.Note• Make sure to add an outside line access number when you store anoutside telephone number.• If you are using a PRI line, you may need to enter # at the end ofoutside telephone numbers.Follow the steps below to edit a Personal Custom Service.1. Click Edit.2. For each Key, specify an Assigned Operation.3. For each Assigned Operation that is specified, specify a Value fromthe following.• Transfer to specified mailbox: Allow the caller to leave messagesin a specified mailbox.• Transfer to specified extension: Transfers the caller to a specifiedextension.• Transfer to Voice Mail Service: Allows the caller to access VoiceMail Service.• Transfer to Automated Attendant Service: Allows the caller toaccess Automated Attendant Service.• Transfer to specified Custom Service Menu: Transfers the callerto the Custom Service specified here.• Transfer to operator: Connects the caller to an operator.• Transfer to outside (specified number): Transfers the caller to aspecified outside telephone number. Enter the PBX trunk accessnumber, such as 9.• Page the party: Pages you.• Repeat greeting: Repeats the greeting.• None: No operation assigned.4. Click OK when finished.Outside Numbers Specifies the outside telephone numbers that can be used for the "Transferto outside (specified number)" operation in the Personal Custom Servicesettings.1. Click Edit.2. Enter Outside Number #1–#4: Max. 32 digits consisting of 0–9, , #, andspecial codes:• T: Dial Tone Detection• ,: Dial Pause (default 1 s)• ;: Dial Pause (default 3 s)• 0–9, , #: Dial Code3. Click OK when finished.338 User Manual3.2.1 User Programming
