Item DescriptionNo DTMF Input Operation Specifies the operation taken when no DTMF input (a caller does not dialanything) is received after the Personal Greeting:• Recording: The caller will be guided to leave a message.• Disconnect (All Day): The line will be disconnected, regardless of thetime of day.• Disconnect (Only After Hours): The line will be disconnected only afterhours.No DTMF Input OperationWait TimeSpecifies the duration of time to wait for DTMF input before the action set inNo DTMF Input Operation is performed (0–10 s).Personal Distribution ListItem DescriptionList 1–4 Members Personal Distribution Lists are used to send the same messages to severalmailboxes in a single operation. A maximum of 4 lists can be maintained witheach list containing a maximum of 40 mailboxes.Specifies the mailbox numbers that belong to the list.Follow the steps below to edit list members.1. Click Edit for a Personal Distribution List (1–4) Members item.2. Under Subscribers To Add, click the checkbox in No. for each mailboxto add, referring to the mailbox numbers and mailbox owners’ names.3. Click Add.4. Click OK.Follow the steps below to remove members from a list.1. Click Edit for Personal Distribution Lists (1–4) Members item.2. Under Distribution, click the checkbox in No. for each mailbox to add,referring to the mailbox numbers and mailbox owners’ names.3. Click Delete.4. Click OK.Remote CallItem DescriptionRemote Call TelephoneNumber 1, 2 [0–9, *]Specifies the telephone numbers of destinations to which callers areforwarded when you set Remote Call Forwarding. 2 telephone numbers canbe specified per mailbox.Make sure you begin the telephone number with an outside line accessnumber (to seize an outside line).NoteThis feature may be disabled by system programming for your mailbox.User Manual 3393.2.1 User Programming
