Panasonic LP-M Series Serial Communication Manual
Also see for LP-S Series: Operation manualMaintenance GuideManual
                                                                                                                                                                                                            | |
Contents
|
136■ Lot character string: LTSSets the character string used for “Lot function” to change characters depending on date/time.Setting / Readout data of lot character stringSet the lot character string for the specified number with the following format:STX LTS Subcommand[Lot No.] [Period unit No.] [Start period][End period] [Marking character string]Max. 33-byte(Check sum) DelimiterSub command is “S” at the time of setting and “A” for response data at the time of readout.Readout request of lot character stringSTX LTS R [Lot No.] [Period unit No.]3-byte (Check sum) DelimiterName Data length[byte] Description RemarksLot No. 1 “0”–“3”Period unit 2Period condition Setting rangeYear “01”–“54”Month “01”–“12”Day “01”–“31”Y/M “01”–“54”M/D “01”–“54”Hour “01”–“24”Week “01”–“54”Day of Week “01”–“07”The setting range varies depending onthe condition of period unit.Start period 6Period condition Setting rangeYear “198000”–“209900”Month “000001”–“000012”Day “000001”–“000031”Y/M “198001”–“209912”M/D“000101”–“001231”(The higher 4 characters:month, the lower 2characters: date)Hour “000000”–“000023”Week “000000”–“000054”Day of Week“000000”–“000006”(“000000”: Sunday,“000006”: Saturday)The start/end period of marking characterstring for setting is set.The setting range varies depending onthe condition of period unit.Set “999999” for both of start and endperiod to delete it.“999999” is indicated if the period whichhas not been set is read out.End period 6MarkingcharacterstringMax. 18 Use the shift-JIS code.(Up to 9 characters)The character string to be marked withthe specified period is set. Specify 0-byteof data length to delete the characterstring of period.Reference• The common lot (Lot function Nos. 4 to 7) cannot be set and read out. (NAK09 is returned.)When the period unit exceeds the setting range above, NAK09 is returned.ME-LPMSZ-SR-9 |
Related manuals for Panasonic LP-S Series
This manual is suitable for:
LP-S SeriesLP-M SeriesLP-M200LP-M200-CHNLP-M200-SLP-M200-S-CHNLP-M205LP-M205-CHNLP-M205-SLP-M205-S-CHNLP-M500LP-M500-CHNLP-M500-SLP-M500-S-CHNLP-M505LP-M505-CHNLP-M505-SLP-M505-S-CHNLP-MA00LP-MA00-CHNLP-MA05LP-MA05-CHNLP-MA05-SLP-MA05-S-CHNLP-MA06LP-MA06-CHNLP-MA06-SLP-MA06-S-CHNLP-S200LP-S200-CHNLP-S200-SFLP-S202LP-S202-CHNLP-S202-SFLP-S205LP-S205-CHNLP-S205-SFLP-S500LP-S500-CHNLP-S500-SFLP-S500WLP-S500W-CHNLP-S502LP-S502-CHNLP-S502-SFLP-S505LP-S505-CHNLP-S505-SFLP-S505WLP-S505W-CHNLP-Z SeriesLP-Z130LP-Z130-CHNLP-Z250LP-Z250-CHNLP-Z256LP-Z256-CHN
manualsdatabase
Your AI-powered manual search engine