Panasonic LP-M Series Serial Communication Manual
Also see for LP-S Series: Operation manualMaintenance GuideManual
                                                                                                                                                                                                            | |
Contents
|
353-1 Command at standard mode3-1-1 Command listCategory Name Code Function DescriptionOperation controlCommand receptionpermissionMKM Controls the reception permission (reception modeON/OFF) for setting and readout of communicationcommands.P.39Laser pumping LSR Controls the laser pumping ON/OFF. P.39Shutter SHT Controls the internal shutter opening/closing. P.40Status request STS Requires the operation status of laser marker, suchas ready status and error occurrence status.P.40Marking status sendingpermissionMST Enables automatic response of marking result (e.g.normal end, and error occurrence, etc.) at the endof marking.P.41Marking trigger MRK Inputs marking trigger (laser radiation startuptrigger).P.42Guide LD display GID Controls radiation of red guide laser for markingposition confirmation.P.43FileFile change (No. specified) FNO Specifies the file No. to change the file. P.44File change (Commentspecified)FNN Specifies the file name (comment) to change thefile.P.44File overwriting registration FOR Overwrite and register the file under editing. P.44File registration FRG Register the file under editing to the specified No. P.45File name FNM Sets name (comment) of file under editing. P.45Character InputMarking character string(ASCII code specified)MCS Sets the marking character string by ASCII code.(For alphanumeric and symbols only)P.46Marking character string(Shift-JIS code specified)STR Sets the marking character string by shift-JIS code.(For characters including KANA, KANJI and functioncharacters)P.46Serial data input SIN Sets the character string specified for “Serial DataFunction” to change characters for each marking.P.48Rank condition RKC Sets input conditions of “Rank Function” to switchcharacters using I/O input.P.50Rank character string RKS Sets character string used for “Rank Function” toswitch characters using I/O input.P.50ME-LPMSZ-SR-9 |
Related manuals for Panasonic LP-S Series
This manual is suitable for:
LP-S SeriesLP-M SeriesLP-M200LP-M200-CHNLP-M200-SLP-M200-S-CHNLP-M205LP-M205-CHNLP-M205-SLP-M205-S-CHNLP-M500LP-M500-CHNLP-M500-SLP-M500-S-CHNLP-M505LP-M505-CHNLP-M505-SLP-M505-S-CHNLP-MA00LP-MA00-CHNLP-MA05LP-MA05-CHNLP-MA05-SLP-MA05-S-CHNLP-MA06LP-MA06-CHNLP-MA06-SLP-MA06-S-CHNLP-S200LP-S200-CHNLP-S200-SFLP-S202LP-S202-CHNLP-S202-SFLP-S205LP-S205-CHNLP-S205-SFLP-S500LP-S500-CHNLP-S500-SFLP-S500WLP-S500W-CHNLP-S502LP-S502-CHNLP-S502-SFLP-S505LP-S505-CHNLP-S505-SFLP-S505WLP-S505W-CHNLP-Z SeriesLP-Z130LP-Z130-CHNLP-Z250LP-Z250-CHNLP-Z256LP-Z256-CHN
manualsdatabase
Your AI-powered manual search engine