Panasonic LP-M Series Serial Communication Manual
Also see for LP-S Series: Operation manualMaintenance GuideManual
                                                                                                                                                                                                            | |
Contents
|
151Name Data length[byte] Description RemarksCharacterheight 6Model type* Setting range [mm]LP-Sxx0(W) “000.20”–“090.00”LP-Sxx5(W) “000.20”–“160.00”LP-Sxx2 “000.20”–“055.00”LP-Mxx0/LP-Zxx0 “000.20”–“120.00”LP-Mxx5 “000.20”–“220.00”LP-Mxx6/LP-Zxx6 “000.20”–“330.00”Character width 6X position 7Model type* Setting range [mm]LP-Sxx0(W) “-045.00”–“+045.00”LP-Sxx5(W) “-080.00”–“+080.00”LP-Sxx2 “-027.50”–“+027.50”LP-Mxx0/LP-Zxx0 “-060.00”–“+060.00”LP-Mxx5 “-110.00”–“+110.00”LP-Mxx6/LP-Zxx6 “-165.00”–“+165.00”X, Y coordinate where the first characteris marked is indicated.Y position 7Characterinterval 6Model type* Setting range [mm]LP-Sxx0(W) “000.00”–“090.00”LP-Sxx5(W) “000.00”–“160.00”LP-Sxx2 “000.00”–“055.00”LP-Mxx0/LP-Zxx0 “000.00”–“120.00”LP-Mxx5 “000.00”–“220.00”LP-Mxx6/LP-Zxx6 “000.00”–“330.00”Indicates the gap between adjacentcharacters.Line interval 6The line pitch to mark the next line isindicated when the character string ismarked over two or more lines.Tilt angle 6 “-180.0”–“+180.0” [mm]The tilt angle for character for marking toX axis is indicated.When the tilt angle is set to 0 degree,this item is not included in the responsedata for readout.Font No. 1 “1”: Font 1“2”: Font 2The number corresponding to the 2 fontspreviously registered is indicated.Bold line width 5• LP-F10 Mode : “00.00”–“01.92” [mm]• LP-F10W ModeModel type* Setting range [mm]LP-Sxx0(W)/LP-Sxx2/LP-Mxx0/LP-Zxx0 “00.00 ” –“02.00 ”LP-Sxx5(W)/LP-Mxx5/LP-Mxx6/LP-Zxx6 “00.00 ”–“03.20 ”Laser powercorrection 3 “000”–“200” [%] • The correction ratio is calculatedusing the value set at the lasercondition as 100%.• Laser Pulse Cycle Correction can bespecified only in LP-F10 mode.Scan speedcorrection 3 “050”–“200” [%]Laser pulsecycle cor. (3) “050”–“200” [%](LP-F10 mode only)* For the detail of the model type, refer to “Target laser marker” (P.4).3. When the marking form is a sector markingData length : 73-byte (LP-F10 mode), 70-byte (LP-F10W mode)Name Data length[byte] Description RemarksCharactercondition No. 2 “01”–“30”ME-LPMSZ-SR-9 |
Related manuals for Panasonic LP-S Series
This manual is suitable for:
LP-S SeriesLP-M SeriesLP-M200LP-M200-CHNLP-M200-SLP-M200-S-CHNLP-M205LP-M205-CHNLP-M205-SLP-M205-S-CHNLP-M500LP-M500-CHNLP-M500-SLP-M500-S-CHNLP-M505LP-M505-CHNLP-M505-SLP-M505-S-CHNLP-MA00LP-MA00-CHNLP-MA05LP-MA05-CHNLP-MA05-SLP-MA05-S-CHNLP-MA06LP-MA06-CHNLP-MA06-SLP-MA06-S-CHNLP-S200LP-S200-CHNLP-S200-SFLP-S202LP-S202-CHNLP-S202-SFLP-S205LP-S205-CHNLP-S205-SFLP-S500LP-S500-CHNLP-S500-SFLP-S500WLP-S500W-CHNLP-S502LP-S502-CHNLP-S502-SFLP-S505LP-S505-CHNLP-S505-SFLP-S505WLP-S505W-CHNLP-Z SeriesLP-Z130LP-Z130-CHNLP-Z250LP-Z250-CHNLP-Z256LP-Z256-CHN
manualsdatabase
Your AI-powered manual search engine