Panasonic LP-M Series Serial Communication Manual
Also see for LP-S Series: Operation manualMaintenance GuideManual
                                                                                                                                                                                                            | |
Contents
|
58■ Bar code marking condition: BRFSets the marking condition for bar code and 2D code.Setting / Readout data of bar code marking conditionSTX BRF Subcommand[Bar code No.] [Layer No.] [Code type][Setting data (varies depending on bar code type)] (Check sum) DelimiterSub command is “S” at the time of setting and “A” for response data at the time of readout.Readout request of bar code marking conditionWhen the code type is other than composite:STX BRF R [Bar code No.]2-byte (Check sum) DelimiterWhen the code type is composite:STX BRF R [Bar code No.] [1D/2D selection]3-byte (Check sum) DelimiterIn [1D/2D Selection] field, specify “1” for readout of 1D side or “2” for readout of 2D side of composite code.1. QR code (Data length: 44-byte)Name Data length[byte] Description RemarksBar code No. 2 “00”–“15”Layer No. 2 “00”–“15”Code type 2“10”: Model 1“11”: Model 2“12”: Micro QR codeSystemreservation 1 “0” fixedVersion 2Model 1: “00”–“14”Model 2: “00”–“22”Micro QR: “00”–“04”When specifying “00”, it isautomatically specified.Data input mode 1“0”: Number“1”: Alpha (text)“2”: Binary“3”: KanjiError correctionlevel 1“0”: L“1”: M“2”: Q“3”: HFor micro QR, Error CorrectionLevel “H” cannot be used.X position 8Model type* Setting range [mm]LP-Sxx0(W) “-045.000”–“+045.000”LP-Sxx5(W) “-080.000”–“+080.000”LP-Sxx2 “-027.500”–“+027.500”LP-Mxx0 / LP-Zxx0 “-060.000”–“+060.000”LP-Mxx5 “-110.000”–“+110.000”LP-Mxx6/LP-Zxx6 “-165.000”–“+165.000”Specifies the center coordinate ofthe code.Y position 8Rotation angle 7 “-180.00”–“+180.00” [°]Module H. 5“0.001”–“9.999” [mm]Interval of module in longitudinaldirection.Module W. 5 Interval of module in lateral direction* For the detail of the model type, refer to “Target laser marker” (P.4).ME-LPMSZ-SR-9 |
Related manuals for Panasonic LP-S Series
This manual is suitable for:
LP-S SeriesLP-M SeriesLP-M200LP-M200-CHNLP-M200-SLP-M200-S-CHNLP-M205LP-M205-CHNLP-M205-SLP-M205-S-CHNLP-M500LP-M500-CHNLP-M500-SLP-M500-S-CHNLP-M505LP-M505-CHNLP-M505-SLP-M505-S-CHNLP-MA00LP-MA00-CHNLP-MA05LP-MA05-CHNLP-MA05-SLP-MA05-S-CHNLP-MA06LP-MA06-CHNLP-MA06-SLP-MA06-S-CHNLP-S200LP-S200-CHNLP-S200-SFLP-S202LP-S202-CHNLP-S202-SFLP-S205LP-S205-CHNLP-S205-SFLP-S500LP-S500-CHNLP-S500-SFLP-S500WLP-S500W-CHNLP-S502LP-S502-CHNLP-S502-SFLP-S505LP-S505-CHNLP-S505-SFLP-S505WLP-S505W-CHNLP-Z SeriesLP-Z130LP-Z130-CHNLP-Z250LP-Z250-CHNLP-Z256LP-Z256-CHN
manualsdatabase
Your AI-powered manual search engine