85[Connections and Settings in Position Control Mode]Connections andSettings in PositionControl ModeCheck that alarm code LED does not flash? (It is out during normal operation).It starts flashing in case of an alarm.An alarm code (refer to pages 145 to 148) indicates the alarm code numberby the number of flashes of orange and red lights.Orange: 10 digit Red: 1 digitDescriptionColor ofLED StatusThe main power is turned ON. The driver is switched ON.The LED flashes (for 1 second) when a warning is issued.(Abnormal overload, regeneration, and fan rotation speed)Alarm output.(Example)When overload (alarm code No.16) occurs and the motor stops:The orange light flashes once and red one flashes 6 times.Orange1 sec.Red0.5 sec.0.5 sec.1 sec.Red0.5 sec.Red0.5 sec.Red0.5 sec.Red0.5 sec.Red0.5 sec.0.5 sec. 0.5 sec. 0.5 sec. 0.5 sec.After 2 secondsGreenOrangeRed(2) Check LED status.(3) Setting the parameterPrepare for a personal computer and “PANATERM® ”. Or prepare for a console.(4) Enter a command that matches the control mode.Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
