100 Adjustments and Settings for Recording : Handling data1 Using the menu operations, open the FILE> screen from the FILE page.2 Turn the JOG dial button to move the arrow(cursor) to the FILE NO. item.3 Press the JOG dial button and the file numberwill flash. Turn the JOG dial button to selectthe file (1 to 8) to be recorded.4 Press the JOG dial button to enter the filenumber.5 Turn the JOG dial button to move the arrow(cursor) to the TITLE : item.6 Press the JOG dial button.The arrow (cursor) moves to the title input area, and theinput mode is established.7 Press the JOG dial button again and turn ituntil the character to be set is displayed.When the button is turned, the character displayed isswitched in the following sequence:Space: ÐAlphabetical characters: A to ZÐNumerals: 0 to 9ÐSymbols: ', >, <, /, -, . , x8 Press the JOG dial button to enter thecharacter.9 Turn the JOG dial button to move the arrow(cursor) to the next position (right), and repeatsteps 7 and 8 to set the characters (maximumof 12).10 When the title has been input, turn the JOGdial button to move the arrow (cursor) to the“:” position.11 Press the JOG dial button.The arrow (cursor) returns to the “TITLE : ” item.12 Turn the JOG dial button to move the arrow(cursor) to the WRITE position.To save the lens file into the built-in memorySelect the file No.< LENS FILE ># FILE NO. :1READWRITERESET ALLTITLE:1: 5:2: 6:3: 7:4: 8:Give a title to the selected file.< LENS FILE >FILE NO. :1READWRITERESET ALL# TITLE:1: 5:2: 6:3: 7:4: 8:< LENS FILE >FILE NO. :1READWRITERESET ALL;TITLE:1: 5:2: 6:3: 7:4: 8:< LENS FILE >FILE NO. :1READWRITERESET ALL;TITLE:¢¢¢¢¢¢¢¢¢¢¢¢1: 5:2: 6:3: 7:4: 8:< LENS FILE >FILE NO. :1READWRITERESET ALL# TITLE:¢¢¢¢¢¢¢¢¢¢¢¢1: 5:2: 6:3: 7:4: 8:< LENS FILE >FILE NO. :1READ# WRITERESET ALLTITLE:¢¢¢¢¢¢¢¢¢¢¢¢1: 5:2: 6:3: 7:4: 8:
