93Adjustments and Settings for Recording : Handling dataAdjustments and Settings for Recording5 Press the JOG dial button.This moves the cursor to the entry area, putting the unitin entry mode.6 Turn the JOG dial button until a desiredcharacter appears.The characters that appear are switched in thefollowing order:Space: ÐAlphabetical characters: A to ZÐNumerals: 0 to 9ÐSymbols: ', >, <, /, -7 Press the JOG dial button to accept a desiredcharacter.8 Turn the JOG dial button to move the cursor tothe next digit (clockwise), and repeat Steps 6 -7 to set characters (up to eight characters).9 When the title is set, turn the JOG dial buttonto move the cursor to [:].10 Press the JOG dial button to return the cursorto the option TITLE:.11 Turn the JOG dial button to move the cursor tothe option WRITE.12 Press the JOG dial button to display thefollowing message:The data will not be written if any of the following messagesappears when the JOG dial button is pressed:13 Turn the JOG dial button to move the cursor toYES. Then, press the dial button.When the data has been written, the following messageappears:< SD CARD READ/WRITE >R.SELECT :1READW.SELECT :1WRITECARD CONFIGTITLE READ;TITLE:1: ******** 5: ********2: ******** 6: ********3: ******** 7: ********4: ******** 8: ********To write data on a selected file< SD CARD READ/WRITE >R.SELECT :1READW.SELECT :1WRITECARD CONFIGTITLE READ;TITLE:1: ******** 5: ********2: ******** 6: ********3: ******** 7: ********4: ******** 8: ********Error message RemedyWRITE NGNO CARD(No SD memory card inserted.)Insert an SD memory card.WRITE NGFORMAT ERROR(SD memory card not properlyformatted.)The card has not been formattedusing the unit.Replace the card.WRITE NGERROR(SD memory card not writable.)The card may be defective.Replace the card.WRITE NGWRITE PROTECT(SD memory card write-protected.)Remove the card and disablethe protect.WRITE NGCANNOT ACCCESS(SD memory card notaccessible.)Example: The SD memory cardis not accessible because it isbeing played back.After the operation in process,format the card.WRITENGCARD FULL(SD memory card has no freespace.)The card is not writable becauseit has no free space. Deleteunwanted files or replace thecard with a new one.WRITE?YES# NOTITLE:WRITE OK
