28 Parts and their Functions: Display Window FunctionsError Code Indication> [Warning System] (page 153)Display Window FunctionsP2 card/battery-remaining level indicationsMemory action status indicationLOOPhMEDIA E FY minM s frm13 240DVTCG TIME DAT E P-iRECSL AV E HOLD W GPSBAT T E FOVE R OVE R10OO40-dB3020HDVCTLNDFBattery-remaining level indication barFor a battery with a digital indicator (percentage indication),if the remaining level of the battery is higher than 70%, allseven segments up to the “F” position are lit.When the remaining level falls below 70%, the segments goout one-by-one for each drop of 10%. All seven segmentscan be set to light up when the battery-remaining balance is100%. To do so select “100%” for the menu item BATTREMAIN FULL. The menu item BATT REMAIN FULL isfound in the screen on the MAINOPERATION page.Audio channel level meterWhen the MONITOR SELECT CH1/2 / CH3/4 switch is set to[CH1/2], the meter indicates 1 and 2 as the audio channelnumbers, together with their audio levels. When the switch isset to [CH3/4], the meter indicates 3 and 4 as the audiochannel numbers, together with their audio levels.Media-remaining space indication barThe bar indicates the remaining free space on each P2 card,using a seven-segment display.Each segment can represent either three or five minutes ofremaining free space, depending on the value set through themenu option CARD REMAIN/. According to the set value, thesegments disappear one-by-one. The menu option CARDREMAIN / can be found in the screen onthe MAIN OPERATION page.LOOPhMEDIA E FY minM s frm13 240DVTCG TIME DAT E P-iRECSL AV E HOLD W GPSBAT T E FOVE R OVE R10OO40-dB3020HDVCTLNDFInformation indicationLOOP:Stays illuminated in LOOP REC mode.> [Loop Recording] (page 39).LOOPhMEDIA E FY minM s frm13 240DVTCG TIME DAT E P-iRECSL AVE HOLD W GPSBAT T E FOVE R OVE R10OO40-dB3020HDVCTLNDFMode indicationW: Stays illuminated when the camera-recorder operates inSD mode (480-59.94i, 576-50i) and is set to 16:9 mode.HD: Stays illuminated when the camera-recorder is in HDmode (1080i).DV: Stays illuminated when the recording/playback format isDV.GPS: Stays illuminated when radio waves are not receivedduring GPS operation.GPS : Stays illuminated when radio waves are received duringGPS operation.P-REC: Stays illuminated when the PRE REC MODE is set toON, and blinks when recording is continued after therecording tally lamp has gone out. The menu item PREREC MODE is found in the screenon the SYSTEM SETTING page.iREC: Remains illuminated during INTERVAL REC moderecording, and blinks during a pause.i: Blinks when INTERVAL REC mode is selected.Time code indicationNDF: Stays illuminated when the time code is in non-drop framemode.DF: Stays illuminated when the time code is in drop framemode.SLAVE: Stays illuminated when the time code is externally locked.HOLD: Stays illuminated when the time code generator/readervalue is frozen.CTL: Stays illuminated when the DISPLAY switch is positionedat [CTL] to display the CTL count.TCG: Stays illuminated when the DISPLAY switch is positionedat [TC] (or [UB]) to display the TC (or UB) generatorvalue.TC: Stays illuminated when the DISPLAY switch is positioned at[TC] (or [UB]) to display the TC (or UB) reader value.VTCG: Stays illuminated when the DISPLAY switch is positionedat [UB] to display the VIUB generator value.VTC: Stays illuminated when the DISPLAY switch is positionedat [UB] to display the VIUB reader value.TIME: Stays illuminated when the DISPLAY switch is positioned at[UB] to display the real-time hour, minute and second.DATE: Stays illuminated when the DISPLAY switch is positionedat [UB] to display the real-time date.No Indication:The CTL, VTCG, TIME, and DATE stay off when the DISPLAYswitch is positioned at [UB] to display real time, time zone, hourand minute.Time count indication:The time code, CTL, user bits and real time are shown.NoteWhen the DISPLAY switch is positioned at UB, each press ofthe HOLD button changes the indication through VTCG (VTC)> DATE > TIME > No Indication (Time Zone) > TCG (TC),in that order.
