Panasonic P2HD AJ-HPX3100G Operating Instructions Manual

Also see for AJ-HPX3100G: Manual Operating instructions

Contents

164 Menu: Menu Description Tables* This variable range is the numerical values for 59.94 Hz. For 50Hz, the frame rate is up to 24f.NoteDisplayed REC TIME, PAUSE TIME and TOTAL REC TIME aretranslated into either drop-frame or non-drop-frame accordingto the mode of operation.TAKE TOTAL TIME is actual time. Therefore, TOTAL REC TIMEmay incorporate fractions, depending on the settings.REC FUNCTIONItems/Data SavedAdjustableRange RemarksINTERVALREC MODEOFFONONE SHOTSets INTERVAL REC function.OFF: INTERVAL REC is not performed.ON: Uses internal memory to performinterval recording.ONE SHOT:Performs “one-shot” recording for theduration specified under REC TIME,and then stops.NoteThis item cannot be changed when “ON”is selected for the LOOP REC MODEitem or for the ONE CLIP REC MODEitem.In addition, this does not work in Nativemode or in 24P and 24PA modes.– C U F –INTERVALREC HOLDONOFFSelects whether INTERVAL REC MODEsettings are retained or not when thepower is turned off once.ON: RetainOFF: Do not retain. The INTERVAL RECMODE is OFF whenever the poweris turned on again.– C U F –REC TIME * 00s01f:59s29fSet REC TIME (1 cut).NoteHowever, the settings can be made frameby frame, and the numbers of the cut-offunit frames for the shortest time periodand the set time on the actual operationmay vary with the recording method. Fordetails, refer to [Interval Recording] (page39).– C U F –PAUSE TIME * 00h00m00s01f:00h04m59s29f:23h59m59s29fSpecify PAUSE time for recording.NoteHowever the settings can be made frameby frame, and the numbers of the cut-offunit frames for the shortest time periodand the set time on the actual operationmay vary with the recording method. Fordetails, refer to [Interval Recording] (page39).– C U F –TAKE TOTALTIMENONE:5daySpecify the time needed for shooting.Select from NONE (continue untiloperation is manually stopped) to 5 days.– C U F –TOTAL RECTIME *00m00s01f:99m59s29fOVER100minNONEDisplay total recorded time. The settingcannot be changed using this option.Displays the recording time (recordingtime needed for the P2 card) calculatedusing REC TIME, PAUSE TIME, andTAKE TOTAL TIME.NoteA value based on actual processing isdisplayed.– – – – –START DELAY 0SEC:10SECSet the delay after pressing REC buttonto start recording in INTERVAL REC.– C U F –PRE RECMODEONOFFSelect whether or not to enable PRE-RECORDING.ON: PRE-RECORDING enabled.OFF: PRE-RECORDING disabled.NoteSpecify the PRE-RECORDING time byusing the menu option PRE REC TIME.– C U F –Items/Data SavedAdjustableRange RemarksPRE RECTIME1SEC:8SEC:15SECSet PRE RECORDING.1-15SEC:Set the length of time that can beretrospectively recorded before theREC button is pressed.NoteWhen the SYSTEM MODE menu optionon the SYSTEM MODE screen is set to1080-59.94i or 1080-50i, or when it is setto 480-59.94i or 576-50i and the RECMODE menu option is set to DVCPRO50,the upper limit of the above recordingtime is 8 seconds.– C U F –LOOP RECMODEONOFFSelect whether or not to enable LOOP REC.This setting can be used with PRE-RECORDING features.ON: Enable LOOP REC.OFF: Disable LOOP REC.Notesz After the power is turned off, this itemwill default to OFF the next time thepower is turned on.z This item cannot be changed in thefollowing cases.When “ON” or “ONE SHOT” isselected for the INTERVAL RECMODE itemWhen “ON” is selected for the ONECLIP REC MODE itemz This does not work in Native mode orin 24P and 24PA modes.– – – F –REC START ALLNORMALSelect operating modes that allowrecording to start.ALL: Allow recording to start during stop,recording pause, and playback.NORMAL:Allow recording to start during stopand recording pause.NoteEven if this is set to “ALL”, the operationis “NORMAL”, when “ON” or “ONESHOT” is selected in INTERVAL RECMODE.– C U F –P.ON RECSLOT SELHOLDSLOT1Select the recording order of the slotwhen the power is turned on.HOLD:The recording order starts with thecard previously selected when thepower was turned off.SLOT1:The recording order starts with thecard that is inserted in Slot 1 when thepower is turned on.– C U F –Example of drop-frameREC TIME 02s00fPAUSE TIME 02s00fTAKE TOTAL TIME 40minTOTAL REC TIME 19m59s06f