167Menu: Menu Description TablesMenuNoteThe screen is displayed when SYSTEMMODE is set to 1080-59.94i, 1080-50i (HD mode).DOWNCON SETTINGItems/Data SavedAdjustableRange RemarksDOWNCONMODESQUEEZELT-BOXS-CROPFor setting the mode of the downconverter output signals.NotePart of the down converter output imageat the top or bottom may be disruptedwhen “LT-BOX” is selected in this menuoption, but this is not a malfunction.– C U F RDETAIL ONOFFFor setting the detail function for thedown converter output signals ON/OFF.The down converter output signalscontain detailed components that are setduring HD signal processing. In thissetting, these signals overlap the detailedcomponents dedicated to the downconverter outputs.Even if this setting is turned off, it isimpossible to turn off the detailedcomponents set during HD signalprocessing.– C U F RH.DTL LEVEL 000831For setting the horizontal detail correctionlevel for the down converter outputsignals.– C U F RV.DTL LEVEL 000431For setting the vertical detail correctionlevel for the down converter outputsignals.– C U F RDTL CORING 0001:15For setting the noise elimination level ofthe details.– C U F RH.DTL FREQ. 135For selecting the horizontal detailfrequencies.1: 2.5 MHz 4: 4 MHz2: 3 MHz 5: 4.5 MHz3: 3.5 MHz– C U F R2D LPF ONOFFFor setting the 2-D low path filter reducingcross colors.ON: Cross colors are reduced.OFF: Cross colors are not reduced.– C U F RSETUP 0%7.5%For setting the setup level for the downconverter output signals.(Only for 1080-59.94i)NoteWhen the system frequency is set to 50Hz, the setup level will be 0%.– C U F RLCD MONITORItems/Data SavedAdjustableRange RemarksBRIGHTNESS –7:+0:+7Adjust the LCD monitor brightness.– C U F –COLOR LEVEL –7:+0:+7Adjust the LCD monitor chroma level.– C U F –CONTRAST –7:+0:+7Adjust the LCD monitor contrast.– C U F –BACKLIGHT OFFLOWNORMALHIGHTurn the backlight off, or adjust itsbrightness.OFF: turns the backlight OFF.LOW: turns the backlight to lowerthan NORMAL.NORMAL Mode normally usedHIGH: This is brighter thanNORMAL– C U F –SELF SHOOT NORMALMIRRORSelect whether or not to change the LCDmonitor to mirror image.NORMAL: Do not change to mirrorimage.MIRROR: Change to mirror image.– C U F –