166 Menu: Menu Description TablesNoteIn HD mode, the safety zone marker and the safety zone areaare not displayed on the SD SDI output and VBS output fromthe MON OUT connector if “LT-BOX” or “S-CROP” is selectedin DOWNCON MODE.Items/Data SavedAdjustableRange RemarksSAFETY MARK OFF12Select the frame type for the safety zonemarker.OFF: Do not display frame.1: Box2: Corner frame– C U F RSAFETY AREA 80%90%100%For setting the size of the safety marker.It is possible to set the size by units of 1%with a fixed ratio between of width andheight.– C U F RFRAME MARK ONOFFSet the frame marker to “ON” or “OFF”.– C U F RFRAME SIG 4:313:914:9VISTACNSCOSet the frame marker.The VISTA ratio is 16:8.65.The CNSCO ratio is 16:6.81.– C U F RUSER BOX ONOFFFor setting whether to include the userbox in the signal from the SDI connector.– C U F RUSER BOXWIDTH001013100For setting the width of the user box.– C U F RUSER BOXHEIGHT001013100For setting the height of the user box.– C U F RUSER BOX HPOS-50+00+50For setting the horizontal position of theuser box center.– C U F RUSER BOX VPOS-50+00+50For setting the vertical position of the userbox center.– C U F RMON OUT MARKERItems/Data SavedAdjustableRange RemarksCENTERMARKOFF1234Switch the center mark.OFF: Do not display center mark.1: + (large)2: Hollow (large)3: + (small)4: Hollow (small)– C U F RSAFETY MARK OFF12Select the frame type for the safety zonemarker.OFF: Do not display frame.1: Box2: Corner frame– C U F RItems/Data SavedAdjustableRange RemarksSAFETY AREA 80%90%100%For setting the size of the safety marker.It is possible to set the size by units of 1%with a fixed ratio between of width andheight.– C U F RFRAME MARK ONOFFSet the frame marker to “ON” or “OFF”.– C U F RFRAME SIG 4:313:914:9VISTACNSCOSet the frame marker.The VISTA ratio is 16:8.65.The CNSCO ratio is 16:6.81.– C U F RUSER BOX ONOFFFor setting whether to include the userbox in the signal from the MON OUTconnector.– C U F RUSER BOXWIDTH001013100For setting the width of the user box.– C U F RUSER BOXHEIGHT001013100For setting the height of the user box.– C U F RUSER BOX HPOS-50+00+50For setting the horizontal position of theuser box center.– C U F RUSER BOX VPOS-50+00+50For setting the vertical position of the userbox center.– C U F R
