101Adjustments and Settings for Recording : Handling dataAdjustments and Settings for Recording13 Press the JOG dial button.The following message is displayed.14 Turn the JOG dial button to move the arrow(cursor) to YES, and press the JOG dialbutton.The current white shading correction value, the flarecompensation value, and the RB gain offset correctionvalue are stored in the built-in memory of the unit.NoteThe values will not be stored in the unit’s internal memoryif another menu screen is selected without executingWRITE or if the menu is exited.15 Press the MENU button.The setting menu is cleared, and the displays showingthe unit’s current statuses appear at the top and bottomof the viewfinder screen.1 Using menu operations, open the FILE> screen from the FILE page.2 Turn the JOG dial button to move the arrow(cursor) to the FILE NO. item.3 Press the JOG dial button and the file numberwill flash. Turn the JOG dial button to selectthe file (1 to 8) to be read.4 Press the JOG dial button to enter the filenumber.5 Turn the JOG dial button to move the arrow(cursor) to the READ item.6 When the JOG dial button is pressed, thefollowing message appears.7 Turn the JOG dial button to move the arrow(cursor) to YES, and press the JOG dialbutton.The recorded correction values for the white shading,flare, and RB gain offset are read.8 Press the MENU button.The setting menu is cleared, and the displays showingthe unit’s current statuses appear at the top and bottomof the viewfinder screen.WRITE?YES# NOTo read the lens file from the builtin memory< LENS FILE ># FILE NO. :1READWRITERESET ALLTITLE:1: 5:2: 6:3: 7:4: 8:< LENS FILE >FILE NO. :1# READWRITERESET ALLTITLE:1: 5:2: 6:3: 7:4: 8:READ?YES# NO
